Welcome to Our Community

Some features disabled for guests. Register Today.

Spindle cooling setup

Discussion in 'Other Builds' started by Anthony Bolgar, Nov 1, 2016.

  1. Anthony Bolgar

    Anthony Bolgar Journeyman
    Builder

    Joined:
    Jan 14, 2016
    Messages:
    354
    Likes Received:
    198
    Smcfarrell and GrayUK like this.
  2. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    Gonna be interested in this! :thumbsup:
     
  3. Anthony Bolgar

    Anthony Bolgar Journeyman
    Builder

    Joined:
    Jan 14, 2016
    Messages:
    354
    Likes Received:
    198
    I was racking my brain trying to find a small waterproof container to have at least a small resevoire....then I remembered I picked up two waterproof instrument cases ( 120mm X 160mm X 80mm) on the FreeStore, one of them will fit just beautifully in an 80mm v-slot setup, will probably make the rad/fan frame out of 80mm v-slot as well so that it will be symetrycal, and let me make some better rad/fan brackets to hold them in place. and it has a clear lid, so I can dye the water/antifreeze a cool florescent color for some bling.
     
  4. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,760
    Likes Received:
    2,443
    Great job @Anthony Bolgar love this, sut a professional and sleek setup. :thumbsup:
    Looking forward to seeing how you set up the reservoir
    Thanks for sharing this.
     
  5. Anthony Bolgar

    Anthony Bolgar Journeyman
    Builder

    Joined:
    Jan 14, 2016
    Messages:
    354
    Likes Received:
    198
    I am going to try using it without a reservoir, I hope it will work just as it is. If it does need a small reservoir, I will hang it on the back side of the frame, or possibly build it into a mounting base. This has been a sort of design it as you build it project, I work best that way.
     
    Mark Carew likes this.
  6. dddman

    dddman Journeyman
    Builder

    Joined:
    Mar 2, 2014
    Messages:
    468
    Likes Received:
    187
    This is the system I made :)

    [​IMG]
     
    Anthony Bolgar likes this.
  7. Anthony Bolgar

    Anthony Bolgar Journeyman
    Builder

    Joined:
    Jan 14, 2016
    Messages:
    354
    Likes Received:
    198
    Looks good @dddman . Your picture made me realize that I should have a temperature sensor with readout. Will have to add that feature to mine.
     
  8. dddman

    dddman Journeyman
    Builder

    Joined:
    Mar 2, 2014
    Messages:
    468
    Likes Received:
    187
    haha... this is my power supply voltage... now I need a temperature readout!
     
  9. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    dddman. Picture has gone. :banghead:
    Can you re-upload it.
     
  10. dddman

    dddman Journeyman
    Builder

    Joined:
    Mar 2, 2014
    Messages:
    468
    Likes Received:
    187
    Still there for me... here it is :
     

    Attached Files:

    Smcfarrell, Mark Carew and GrayUK like this.
  11. Anthony Bolgar

    Anthony Bolgar Journeyman
    Builder

    Joined:
    Jan 14, 2016
    Messages:
    354
    Likes Received:
    198
    @dddman lol! It is so obvious that a temp readout would be helpful and we both missed it.
     
  12. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,760
    Likes Received:
    2,443
    Super cool @dddman looks like something straight out of back to the future! :thumbsup:
    Love it
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice