Welcome to Our Community

Some features disabled for guests. Register Today.

Vacuum Forming Machine

Discussion in 'Vacuum Forming Machines' started by rengelking, May 22, 2017.

  1. rengelking

    Builder

    Joined:
    Feb 25, 2017
    Messages:
    3
    Likes Received:
    30
    rengelking published a new build:

    Read more about this build...
     
    TheArtman, Conco and FatGut like this.
  2. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,018
    Likes Received:
    1,688
    What is your heating element? This is a cool project. I am curious as to how strong the plastic is, too. I have some projects this would work well with.
     
  3. rengelking

    Builder

    Joined:
    Feb 25, 2017
    Messages:
    3
    Likes Received:
    30
    Thanks! It uses 2 of these heaters.. you have to carefully disassemble them, and rewire them; I was able to reuse the controls, but I disabled the thermal safety sensors, and also bypassed the over voltage cutoff. I have them set at half power. They work great because the heat is only absorbed by the plastic, with the aluminum reflecting most of it:
    Ecotronic 1500-Watt 2-Element Infrared Electric Portable Heater-TQH05 - The Home Depot
    upload_2017-5-22_23-5-22.jpeg
     
    Heika and Conco like this.
  4. rengelking

    Builder

    Joined:
    Feb 25, 2017
    Messages:
    3
    Likes Received:
    30
    Conco and Joe Santarsiero like this.
  5. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,018
    Likes Received:
    1,688
    Thanks fir the info.
     
  6. Anthony Bolgar

    Anthony Bolgar Journeyman
    Builder

    Joined:
    Jan 14, 2016
    Messages:
    354
    Likes Received:
    198
    Nicely done.
     
  7. Sonny Lowe

    Sonny Lowe Journeyman
    Staff Member Builder Resident Builder

    Joined:
    Nov 11, 2015
    Messages:
    143
    Likes Received:
    158
    Thanks for the build and sharing your ideas, looks like it works great!!! I have a vacuum forming table already but lacked a heating source (not any more though :). I'll have too stop by Home Depot this weekend and see if they have any in stock, hell, they might even be on clearance...could I get so lucky!?!?

    Sonny
     
  8. Phil Ghobad

    Builder

    Joined:
    Apr 17, 2016
    Messages:
    1
    Likes Received:
    0
  9. Conco

    Conco New
    Builder

    Joined:
    Jan 1, 2018
    Messages:
    3
    Likes Received:
    0
    Please let me know the parts I need to buy and how to put it together. I need to make molds. This looks fantastic. Thank you so much.
     
  10. Heika

    Heika New
    Builder

    Joined:
    Apr 13, 2018
    Messages:
    2
    Likes Received:
    0
    This is a fantastic build. I happen to have one of those heaters sitting behind me as I type this. I really appreciate the video. If you have a moment, and can explain in more detail how you modified your heaters to do this project, I would be grateful. I can figure out the rest, but have never been much on electronics.
     
  11. Bubba Mouisa

    Builder

    Joined:
    Mar 29, 2022
    Messages:
    2
    Likes Received:
    0
    I found this interesting, I'm not much for plastics, but I'll most likely use this as a starting point to create a form molding machine for bending wood. I'll have to use high pressure air, rather than a vacuum draw though. But, this has given me food for thought, so Thank you.
     
  12. Bubba Mouisa

    Builder

    Joined:
    Mar 29, 2022
    Messages:
    2
    Likes Received:
    0
    I found this interesting, I'm not much for plastics, but I'll most likely use this as a starting point to create a form molding machine for bending wood. I'll have to use high pressure air, rather than a vacuum draw though. But, this has given me food for thought, so Thank you.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice