This is the spindle I bought. Is there an OpenBuilds plate that should be compatible with the mount that is included in the kit linked below? The hole spacing (center of hole to center of hole) is 100mm horizontally and 25mm vertically. Vevor 2.2kw Er20 Water Cooled Spindle Motor Drive Inverter Vfd Clamp Pump Pipe | VEVOR US
You will probably have to manufacture your own. The problem with the Chinese spindle mounts is that there are many that look alike, but not all have the same hole spacing. Most that I have seen have a 100mm hole spacing so the holes are too wide apart for the 80mm extrusion. It would be a simple project that could be done with a drill press chop saw, a printed template, and some aluminum plate.
Just curious if you got this working and if so, what has your experience been in the last year with this here?
