Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

BlackBox

Discussion in 'Other Builds' started by Mark Carew, Feb 22, 2019.

BlackBox Motion Control System

BlackBox Motion Control System

Discussion in 'Other Builds' started by Mark Carew, Feb 22, 2019.

The Openbuilds BlackBox is a new system evolved around a set of subsystems that cover more than just control and also more than just CNC type applications! With a plug-and-play easy connection system this controller can be used with ease, without sacrificing power.

BlackBox Controller driver ecosystem powerful cnc
Page 30 of 30
  1. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,051
    Likes Received:
    4,313
    Double check - just in case it changed

    Does the ToolOn/ToolOff buttons in CONTROL work? (To rule out GCODE being wrong)
    If also not, I'd refer the issue to the laser module vendor - might just be a faulty module
     
    #871 Peter Van Der Walt, Nov 23, 2022
  2. Andreas G.

    Andreas G. New
    Builder

    Joined:
    Apr 5, 2017
    Messages:
    6
    Likes Received:
    0
    The unit lights up at the start of the work and stops at the end. It fires on with the lightburn fire button and switches off when deselected.
     
    #872 Andreas G., Nov 23, 2022
  3. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,051
    Likes Received:
    4,313
    #873 Peter Van Der Walt, Nov 23, 2022
  4. Andreas G.

    Andreas G. New
    Builder

    Joined:
    Apr 5, 2017
    Messages:
    6
    Likes Received:
    0
    Thank you for your help, It might sound naive, but I am not familiar with this, how can I check the Grbl settings?
     
    #874 Andreas G., Nov 23, 2022
  5. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,051
    Likes Received:
    4,313
    OpenBuildsCONTROL > Connect to the controller (Close Lightburn) > Grbl Settings tab

    You can use the Backup settings button if you want us to take a look, but Laser Mode ($32) is in the list
     
    #875 Peter Van Der Walt, Nov 23, 2022
  6. Andreas G.

    Andreas G. New
    Builder

    Joined:
    Apr 5, 2017
    Messages:
    6
    Likes Received:
    0
    Thank you, appreciated
     
    #876 Andreas G., Nov 23, 2022
  7. Andreas G.

    Andreas G. New
    Builder

    Joined:
    Apr 5, 2017
    Messages:
    6
    Likes Received:
    0
    Good evening again, I checked the laser mode enabled in the GRBL settings. The openbuilds software updated automatically. Trying to check the laser the machine now is unable to home. Although the limit switches are enabled, the machine is correctly selected as workbee 1510 with default settings, the z axis is moving normally up to the limit switch and withdrawing, the X axis is reaching the limit switch and continue although the limit switch is operational. The homing is interrupted at this point.
     
    #877 Andreas G., Nov 24, 2022
  8. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,051
    Likes Received:
    4,313
    Confirm it really is, from the Troubleshooting tab. If it was operational it would have worked. Use Troubleshooting tab to see a) that it works and b) is plugged into the correct axis
     
    #878 Peter Van Der Walt, Nov 24, 2022
  9. Jonathan Pace

    Jonathan Pace New
    Builder

    Joined:
    Jul 23, 2018
    Messages:
    8
    Likes Received:
    0
    Does anyone know where I can download a blackbox 4x bin file? I attempted to update my firmware via the Openbuilds software and I received the message update filed now my BlackBox is bricked.
     
    #879 Jonathan Pace, Jan 24, 2023
  10. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,051
    Likes Received:
    4,313
    Wizards and tools > Firmware Flashing tool will flash it for you.
    The BlackBox 4X runs standard Grbl, you can grab the hex from the grbl repo if you need it for something else

    More importantly: do you perhaps know why the flash failed? Could not begin flashing? Do you maybe still have the log onscreen from the attempt? Its rather unlikely that the flashing tool can brick the BlackBox...

    Why were you flashing if I may ask - as they are preflashed and Grbl has not had updates in a couple years? If it was to address a "firmware not found" issue for example? If so, did you refer to the link provided in the error message (flashing is not one of the recommended solutions)
     
    #880 Peter Van Der Walt, Jan 24, 2023
  11. Jonathan Pace

    Jonathan Pace New
    Builder

    Joined:
    Jul 23, 2018
    Messages:
    8
    Likes Received:
    0
    Just in case anyone else has the same issue of attempting to update firmware (which was not needed) and receiving the error "update failed" and the black box failed to boot.

    I solved my issue by using a different USB cable. Not sure why it worked but it worked.
     
    #881 Jonathan Pace, Jan 24, 2023
  12. JRGt12

    JRGt12 New
    Builder

    Joined:
    Jan 4, 2023
    Messages:
    4
    Likes Received:
    0
    Hello!!
    Can the Black Box x32 be used to replace the Shapeoko 3XXL control board?
     
    #882 JRGt12, Jan 22, 2024
  13. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,051
    Likes Received:
    4,313
    Yes, see docs.openbuilds.com/blackbox-x32 to learn all about it
     
    #883 Peter Van Der Walt, Jan 22, 2024
    JRGt12 likes this.
  14. JRGt12

    JRGt12 New
    Builder

    Joined:
    Jan 4, 2023
    Messages:
    4
    Likes Received:
    0
    Thanks!! I’ll look into it.
     
    #884 JRGt12, Jan 28, 2024
Page 30 of 30

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice