I have tried what I know and cannot get the control software to connect to my machine over WIFI. its connected at 10.0.0.111, I had a network printer on 0.55 and it would find that (disconnected to see if it would help, it didn't.)but not the 0.111 of the machine. I have updated the Blackbox firmware with the WIFI firmware update from the pendant on the machine and I can even see the machine when I put. 0.111 in chrome. says "interface usb upload upload gcode". But still cannot connect on the controls network scan. Any help would be greatly appreciated.
Interface is standalone That wifi in CONTROL is for users who want to to do CONTROL > wifi > BlackBox X32. No Interface involved Interface REPLACES the PC (alternative to CONTROL/Computer - makes machine standalone)
Yes. Its either/or. Just remember to also put the BlackBox onto wifi (connect over USB first, go to Grbl Settings tab > Scroll down to Wifi SSID and PSK > Enter your details > Save. Sometimes requires hitting the Reset button on front of BlackBox to reboot with the new settings to connect)
