I have problem with the motor my cnc belt driven I set everything but x axis and y axis are stuck they doesn’t move what should I change to make it move There is attached file for the problem
The first question (there will be others when we know the answer to this) - what controller are you using with your machine? Alex.
Did you remember to load our recommended machine profile (CONTROL > Grbl Settings tab > Select machine from the list > Save and reset when prompted). It has a Custom option that sets the most important values for you. Start with a known working profile then customize from there
Now it worked I tried so chose from the list and I modified on the black box it self I chose mode 1 and correct ms value to 5.3
