Welcome to Our Community

Some features disabled for guests. Register Today.

quenbe not works

Discussion in 'CNC Mills/Routers' started by Stefan Amlow, Oct 21, 2024.

  1. Stefan Amlow

    Builder

    Joined:
    Oct 21, 2024
    Messages:
    2
    Likes Received:
    0
    Hello, I have a new quenbe Pro 2500 x 1500 with Blackbox X32 and now wanted to operate it with the OpenBuilts software.
    I have everything connected. Unfortunately only the milling motor works.
    XYZ doesn't respond at all.
     
  2. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,509
    Likes Received:
    4,422
    Takes two things to move motors:
    1) Did you remember to load a machine profile (CONTROL > Grbl Settings > Select a machine from the list
    2) Proper 24V power (Our recommended meanwell, or 3rd party?) connected, correctly connected, and working
     
  3. Stefan Amlow

    Builder

    Joined:
    Oct 21, 2024
    Messages:
    2
    Likes Received:
    0
    I think so. I loaded the quenbe 1510 machine profile. And power supply is there too.
     
  4. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,509
    Likes Received:
    4,422
    Recheck :)

    No, use one of the profiles in the LIST :) - at least as a starting point - you can use the other vendors settings manually but don't overwrite key values like pin inversions, report masks etc ($4, 5, 6, 10 etc especially, keep the profiles we provide's values for these)

    Yeah but the right one, or one that could have damaged the BlackBox? See my question:

    At the end of the day, it's either not receiving power, or Grbl Settings are wrong.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice