Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

ooznest OX CNC Machine

Discussion in 'CNC Mills/Routers' started by Ryan Lock, Apr 28, 2015.

Ooznest OX CNC Machine

Ooznest OX CNC Machine

Discussion in 'CNC Mills/Routers' started by Ryan Lock, Apr 28, 2015.

The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.

ox cnc machine openbuilds aluminium v-slot ooznest
Page 1 of 38
  1. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    293
    Ryan Lock published a new build:

    Read more about this build...
     
    #1 Ryan Lock, Apr 28, 2015
  2. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,759
    Likes Received:
    2,438
    @Ryan Lock You my friend have outdone yourself on this build! It turned out absolutely excellent. The PDF assembly is top notch as well, thank you for sharing!
    Mark
     
    #2 Mark Carew, Apr 28, 2015
  3. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    Excellent design Ryan. :thumbsup:

    Tweakie.
     
    #3 Tweakie, Apr 28, 2015
  4. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    293
    Thanks for your comments, much appreciated!
     
    #4 Ryan Lock, Apr 28, 2015
  5. Marcel Caraballo

    Marcel Caraballo New
    Builder

    Joined:
    Mar 31, 2015
    Messages:
    2
    Likes Received:
    1
    Super great manual, thanks for sharing this! Cheers
     
    #5 Marcel Caraballo, Apr 28, 2015
  6. MikieLikesIt

    MikieLikesIt New
    Builder

    Joined:
    Dec 28, 2014
    Messages:
    18
    Likes Received:
    1
    Hi out there. Does anyone have a spare set of plates for the OX cnc. I'm located in Ontario Canada.
     
    #6 MikieLikesIt, Apr 28, 2015
  7. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    Really really good job! :thumbsup::thumbsup::thumbsup:

    Gray
     
    #7 GrayUK, Apr 29, 2015
  8. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    293
    Hi, we have just started selling them on our website, we do ship to canada.

    Thanks!
     
    #8 Ryan Lock, Apr 29, 2015
  9. DazTheGas

    DazTheGas Journeyman
    Builder

    Joined:
    Jan 27, 2015
    Messages:
    75
    Likes Received:
    142
    Love the anodized black thing. (Plates Ordered)

    DazTheGas
     
    #9 DazTheGas, May 5, 2015
  10. Lee Whiteley

    Lee Whiteley New
    Builder

    Joined:
    Sep 14, 2014
    Messages:
    23
    Likes Received:
    3
    This is an excellent build all around. There is nothing lacking in both the mechanical and the instructions and the files presented in this build.

    This build will be my guide after I finish my current build using 8020 extrusions. It's a 4'x5' cnc router. I'll be using this machine to make the plates for my built. I really like the idea of having a larger machine for those larger projects and a smaller machine for those smalled projects.

    Thanks for all you've done.

    Lee
     
    #10 Lee Whiteley, May 6, 2015
  11. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    293
    Thanks for the order!

    Thanks for the kind words. Hopefully you can post come pic's once you finish it.
     
    #11 Ryan Lock, May 7, 2015
  12. Robert Walker

    Robert Walker New
    Builder

    Joined:
    Jan 15, 2015
    Messages:
    1
    Likes Received:
    1
    Looking at buying one of these kits in the next few days from ooznest, would it be possible to use 2060 spoiler supports to get an extra 20mm of depth on the Z axis?

    Regards

    Robert
     
    #12 Robert Walker, May 10, 2015
    ChrisV likes this.
  13. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    293
    Yes this shouldn't be a problem. Just a few things to be aware of.

    - You will need to have two spoiler board supports running down the right and left side.
    - To secure the spoiler board this will only be possible to the spoiler board supports, unless you use some L-Brackets at the font and back.
    - Every time you cut something which doesn't take advantage of the extra z height, the z-axis will have to extend down a further 20mm than needed. This will increase the length of the lever arm.

    The only modification needed to make this change, is to change the extrusion. The mounting hardware would be the same.
     
    #13 Ryan Lock, May 11, 2015
  14. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    293
    A couple of pictures of what our completed OX looks like. Our OX uses a CNC xPRO (Thanks Mike!) and a brushless 400w spindle controlled by the xPro.

    We will be updating the build soon with a list of parts to complete the electronics, as well as stl's for all the mounts used.

    [​IMG]

    [​IMG]
     
    #14 Ryan Lock, May 16, 2015
    silopolis, GrayUK and Mark Carew like this.
  15. Jeferson SImoes

    Jeferson SImoes New
    Builder

    Joined:
    Mar 7, 2014
    Messages:
    16
    Likes Received:
    9
    Nice. Where do you get this spindle/power/controller?
     
    #15 Jeferson SImoes, May 16, 2015
  16. DazTheGas

    DazTheGas Journeyman
    Builder

    Joined:
    Jan 27, 2015
    Messages:
    75
    Likes Received:
    142
    Looking good..

    DazTheGas
     
    #16 DazTheGas, May 16, 2015
  17. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    293
    If your in the UK, we use this one here: http://www.ebay.co.uk/itm/121634639622?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

    It includes the spindle, psu, controller, and a mount. The holes on the mount don't really align with anything on the OX, nor any standard plates. We opted to use the openbuilds router mount with a 3d printed spacer.

    Thanks, the plates are due to arrive this week. So you should receive yours towards the end of the week.
     
    #17 Ryan Lock, May 17, 2015
    DazTheGas likes this.
  18. Jeferson SImoes

    Jeferson SImoes New
    Builder

    Joined:
    Mar 7, 2014
    Messages:
    16
    Likes Received:
    9
    Thanks Ryan.

    You can on/off and control the speed of the spindle with Grbl?
     
    #18 Jeferson SImoes, May 17, 2015
  19. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    293
    Yup. Use M3 SX (Where X is your rpm). For the spindle above, full power would be M3 S12000.
     
    #19 Ryan Lock, May 17, 2015
  20. Tim P

    Tim P New
    Builder

    Joined:
    May 12, 2015
    Messages:
    34
    Likes Received:
    17
    Can I get the specs for the included steppers in your kit? More specifically, I need the current rating so I can order the correct resistors.
     
    #20 Tim P, May 19, 2015
  21. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    293
    No worries, attached is the data sheet for the motors used.
     

    Attached Files:

    #21 Ryan Lock, May 20, 2015
  22. DazTheGas

    DazTheGas Journeyman
    Builder

    Joined:
    Jan 27, 2015
    Messages:
    75
    Likes Received:
    142
    Well after a pretty bad day with customers I got a special treat waiting for me at home, my ox plates from Ooznest had arrived over a week early. Absolute pure quality "Cheers Ryan".. Now about getting tomoro off to play with them!!!!

    DazTheGas
     
    #22 DazTheGas, May 20, 2015
    crispin, GrayUK and Tim P like this.
  23. Tim P

    Tim P New
    Builder

    Joined:
    May 12, 2015
    Messages:
    34
    Likes Received:
    17
    I just put in an order for the full kit. Can't wait to start my first CNC. Still a ton of research to do and a few parts to order.
     
    #23 Tim P, May 20, 2015
  24. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    293
    Glad you are happy with the plates, you are the first to receive them :)

    Order received! Now we have the plates, we are going to do a marathon session this weekend and see if we can get all the pre-orders ready ship, i am hoping to get yours shipped by the end of next week.

    If you have any questions regarding other parts, let me know.
     
    #24 Ryan Lock, May 20, 2015
  25. kev20009

    kev20009 New
    Builder

    Joined:
    May 15, 2015
    Messages:
    44
    Likes Received:
    14
    Hi Ryan Starting Cutting Your Plates Today, But The Plates Missing Is The Motor Mounts, They Are Stp Files, Any Chance You Would Have Them In Dfx, And Can You Say Cutting Hight, As Im Doing The 1200x600,

    P.s The V Groove Was Nice And The Cuts, Thanks Ryan Kev, Look Out For More Orders From Me
     

    Attached Files:

    #25 kev20009, May 20, 2015
  26. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    293
    Nice! I have attached the dxf files for them two parts. Sorry i am not sure what you mean by the cutting height? do you mean the insets for the 688zz bearings?

    Thanks for the kind words.
     

    Attached Files:

    #26 Ryan Lock, May 20, 2015
  27. kev20009

    kev20009 New
    Builder

    Joined:
    May 15, 2015
    Messages:
    44
    Likes Received:
    14
    Sorry Ryan Should Have Said The z axes From Bit To Spoil Board, As Im Doing The 1200 Was Woudering If The Hight Would Be Enough, Thanks Again Kev
     
    #27 kev20009, May 20, 2015
  28. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    293
    With a 200mm z-axis extrusion, the max z travel is 69mm, so about 49mm with a spoiler board.
     
    #28 Ryan Lock, May 20, 2015
  29. kev20009

    kev20009 New
    Builder

    Joined:
    May 15, 2015
    Messages:
    44
    Likes Received:
    14
     
    #29 kev20009, May 20, 2015
  30. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    293
    The holes on the plate designs are exactly 5.00mm, we get them manufactured to 0.03mm tolerance, so there is some interference between the bolt and plate, but they still go through freely. If your making them yourself you may want to make the holes slightly bigger.
     
    #30 Ryan Lock, May 21, 2015
Page 1 of 38

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice