Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

Hedron's build with Ooznest kit and Xylotex motors

Discussion in 'CNC Mills/Routers' started by Jesse Jenkins, Oct 24, 2015.

Hedron's build with Ooznest kit and Xylotex motors

Hedron's build with Ooznest kit and Xylotex motors

Discussion in 'CNC Mills/Routers' started by Jesse Jenkins, Oct 24, 2015.

A 3-axis flying gantry (4'x4') mechanical kit is assembled. A 3D printer is used to make cable chain for tidy and cheap wire management. A BeagleBone Black development platform with Machinekit software (LinuxCNC) is configured to control a Xylotex motor driver box connected to an Openbuilds Ox direct-drive pulley and belt motion system. A vacuum dust-collection system is designed, CNC-routed and installed. A steel table is made to mount the table onto.

LinuxCNC Xylotex INI HAL configuration gantry CNC router
  1. Jesse Jenkins

    Jesse Jenkins New
    Builder

    Joined:
    May 11, 2015
    Messages:
    4
    Likes Received:
    7
    Jesse Jenkins published a new build:

    Read more about this build...
     
    #1 Jesse Jenkins, Oct 24, 2015
  2. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,758
    Likes Received:
    2,441
    Well done Hedron Team! Props go out to you on an awesome build and a great informative build post. Thank you for sharing your build :thumbsup:
     
    #2 Mark Carew, Oct 24, 2015
    Jesse Jenkins likes this.
  3. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,016
    Likes Received:
    1,682
    Cool build! I see you are in Portland, too. I would love to swing in and take a look at the Ox if it were possible. Are there hours you guys are open to the public? I am finalizing some design ideas to build my own, but it will be a bit smaller.
     
    #3 Giarc, Oct 26, 2015
    Jesse Jenkins likes this.
  4. Jesse Jenkins

    Jesse Jenkins New
    Builder

    Joined:
    May 11, 2015
    Messages:
    4
    Likes Received:
    7
    Thanks Mark, I'm glad there is such a strong, open community here.
     
    #4 Jesse Jenkins, Oct 26, 2015
    Mark Carew likes this.
  5. Jesse Jenkins

    Jesse Jenkins New
    Builder

    Joined:
    May 11, 2015
    Messages:
    4
    Likes Received:
    7
    Are there hours you guys are open to the public?
    Generally M-F noon - 8pm by appointment.
     
    #5 Jesse Jenkins, Oct 26, 2015
  6. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    293
    Nice build, thanks for the good read and mention, really like the custom table.
     
    #6 Ryan Lock, Oct 26, 2015
    Jesse Jenkins likes this.
  7. Jesse Jenkins

    Jesse Jenkins New
    Builder

    Joined:
    May 11, 2015
    Messages:
    4
    Likes Received:
    7
    You're welcome, thanks for making such great instructions for your ooznest kit. The custom table was designed and built by Richard Cawley (RichArt), a local metal sculpture artist here in Portland. It really helps to make it an everyday shop tool.
     
    #7 Jesse Jenkins, Oct 26, 2015
    Ryan Lock likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice