Hello folks, i am new at the forum and have look for a way to engrave and cut in one step... Can you give me some posibiletys for this...? *sorry for the bad english*
What kind of cutting? You can cut with a laser. Or do you want to engrave something that you can't cut with a laser? If so, then it's easier to just cut them on a milling machine, then place and engrave on another. Another option would be to put a laser next to a router. At the end of the day, you can laser with a milling machine, but you can't mill with a laser cutter.
... I want to engrave with a Laser for example a photo, and cut with te laser around the outline of the picture so that i can take it out of the plywood! The laser is a 2.5W
What software are you using? In LaserWeb 4 I use an operation for raster engraving and then an operations for cutting the outline.
At the moment i am not shure witch i want to use. Benbox is just for playing..., with T2Laser i have problems with the arduino board to run the laser (maybe its my fault). I doesnt test laserweb until now...! I try tomorrow to run laserweb, i hope i can bring it to live with the arduino board...
