@Raed Al Nuaimi
Some old posts on OpenBuilds G+ community - shows a picture story of how I build the torch by converting a handheld torch:

1. Buying the plasma https://plus.google.com/+PetervanderWalt/posts/MPkTR144xuP
2. Tearing down the inverter to see how it works https://plus.google.com/+PetervanderWalt/posts/RsxT7PffvR8
3. Investigating the idea of converting the hand torch: https://plus.google.com/+PetervanderWalt/posts/GVs1mPf6vhA
4. Carved new holder out of PTFE and straigtened the copper tube after grindning away the plastic: https://plus.google.com/+PetervanderWalt/posts/GUggT4eY6Wd
5. Filled it with Epoxy Resin https://plus.google.com/+PetervanderWalt/posts/2d7V5TiwEPg

(The comment threaads under each post holds valuable info too)

 

@EfrainLenisMaturano

Negative on this particular machine. The person I was building it for's son kicked his dad out of the factory and cut off the funding over some family fued, and that sadly ended the project too

I did later go on to build a plasma running on OpenBuilds VSLOT instead:

 

Amazingly awesome! You just made my weekend! Cant wait to see the final result of your german engineering, improving on my sadly never completed project

 

Good catch!

Its been so long, i dont recall, perhaps it was on my cut parts too, since those are more for alignment you could just grind off the extra tab, or fix the drawings before you send them in

 

Click Files and Drawings at the top of this page

 

Sadly no

 

Phew no sorry, been out of the local game since 2015, not sure who'se still around? Microrobotics, Netram, Communica, etc? Most of the belts/pulleys and stuff used on the build was just Aliexpress
No other suggestions, as mentioned before in this thread, the guy I was building this for had a fight with his son and the son kicked him out of the business. Last I heard the unfinished machine still stood on the mezzanine floor of the son's factory