Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

BlackBox

Discussion in 'Other Builds' started by Mark Carew, Feb 22, 2019.

BlackBox Motion Control System

BlackBox Motion Control System

Discussion in 'Other Builds' started by Mark Carew, Feb 22, 2019.

The Openbuilds BlackBox is a new system evolved around a set of subsystems that cover more than just control and also more than just CNC type applications! With a plug-and-play easy connection system this controller can be used with ease, without sacrificing power.

BlackBox Controller driver ecosystem powerful cnc
Page 14 of 30
  1. devloop

    devloop Well-Known
    Builder

    Joined:
    Dec 9, 2017
    Messages:
    61
    Likes Received:
    91
    So your saying that Probe would not work? With the current electronics I use, it has Ohmic sensing, it simple uses the what you have for your Z-Probe but I clamp it to the sheet I'm cutting instead of that base you sell, if you incorporate the software to raise the torch head after Z probe touch off then I'm wanting to throw away what I have for electronics and use this, I love the interface and smart phone compatibility
     
    #391 devloop, Jun 17, 2019
  2. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,049
    Likes Received:
    4,313
    Correct, Grbl does not support THC (Torch Height Control)
     
    #392 Peter Van Der Walt, Jun 18, 2019
  3. devloop

    devloop Well-Known
    Builder

    Joined:
    Dec 9, 2017
    Messages:
    61
    Likes Received:
    91
    How would you set this up for plasma configuration? I dont use or need THC, just figure I need a way for the torch to automatically detect the plate height so the Z axis is controlled by something other than preset G-code
     
    #393 devloop, Jun 18, 2019
  4. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,049
    Likes Received:
    4,313
    Initial Height Sensing. Each time the torch goes off, it moves to new position, probes down to find height, sets zero, starts cut on that plane. When path is complete, before starting next entity, it probes the the height again. To use this way best, build a floating head mount that has some "give" and use Drag tips (that contact the surface, dragging along, the "give" in the floating head allows it to float up/down as appropriate if material warps mid-cut. Initial height sense helps with Piercing (as even with a drag tip you want to be about 2mm above the surface to avoid slag damaging the tip.
     
    #394 Peter Van Der Walt, Jun 18, 2019
  5. devloop

    devloop Well-Known
    Builder

    Joined:
    Dec 9, 2017
    Messages:
    61
    Likes Received:
    91
    Also, how do I adapt the Black Box to my plasma to trigger it, Hypertherm powermax 45
     
    #395 devloop, Jun 18, 2019
  6. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,049
    Likes Received:
    4,313
    #396 Peter Van Der Walt, Jun 18, 2019
  7. devloop

    devloop Well-Known
    Builder

    Joined:
    Dec 9, 2017
    Messages:
    61
    Likes Received:
    91
    Thanks, that is what I was looking for!, I c with the floating torch head this will work
     
    #397 devloop, Jun 18, 2019
    Peter Van Der Walt likes this.
  8. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,049
    Likes Received:
    4,313
    Yip, touch off before each 'path', set zero, move up to pierce height. Trigger, G4 dwell to pierce, lower down to drag height and run while it floats.
     
    #398 Peter Van Der Walt, Jun 18, 2019
  9. David the swarfer

    David the swarfer OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Aug 6, 2013
    Messages:
    3,455
    Likes Received:
    1,915
    the torch height control is mostly used to keep the height constant when the metal plate is not flat. they never are. and they bend more with the cutting heat. so, the floating head that follows the surface is the way to go.
     
    #399 David the swarfer, Jun 19, 2019
    Peter Van Der Walt likes this.
  10. Woodie49

    Woodie49 New
    Builder

    Joined:
    Feb 7, 2014
    Messages:
    61
    Likes Received:
    1
    Is there written Assembly Instruction for the Black Box some where ?
    Thanks
     
    #400 Woodie49, Jun 20, 2019
  11. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    #401 sharmstr, Jun 20, 2019
    Peter Van Der Walt likes this.
  12. Woodie49

    Woodie49 New
    Builder

    Joined:
    Feb 7, 2014
    Messages:
    61
    Likes Received:
    1
    I was able to access from the above link two times, but now all I get is the Photo of the Black Box in the upper left hand coner . Same thing from the web site. Any one know what is going on?
    Thanks
     
    #402 Woodie49, Jun 21, 2019
  13. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    Working fine for me.
     
    #403 sharmstr, Jun 21, 2019
  14. Woodie49

    Woodie49 New
    Builder

    Joined:
    Feb 7, 2014
    Messages:
    61
    Likes Received:
    1
    Ok now, But I can't open from the list on the left side. I would like to printout the Instructions .
    Thanks
     
    #404 Woodie49, Jun 21, 2019
  15. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    Again. Working fine for me. I've attached a PDF version of them. There's also a video:
     

    Attached Files:

    #405 sharmstr, Jun 21, 2019
  16. Woodie49

    Woodie49 New
    Builder

    Joined:
    Feb 7, 2014
    Messages:
    61
    Likes Received:
    1
    I got that it's the other docs like set up and etc. I like to print..
     
    #406 Woodie49, Jun 21, 2019
  17. Woodie49

    Woodie49 New
    Builder

    Joined:
    Feb 7, 2014
    Messages:
    61
    Likes Received:
    1
    Got it finely!
    Thanks
     
    #407 Woodie49, Jun 21, 2019
    sharmstr likes this.
  18. Arzak

    Arzak New
    Builder

    Joined:
    Feb 5, 2018
    Messages:
    6
    Likes Received:
    6
    Question from a rookie
    Running Openbulids control v1.0.179 on Black box. On running program about half way into project ran into error

    [13:36:07] [ G1 F1000 X214.1997 Y74.8826 Z-1.0000 S1000 ] ok
    [13:36:07] [ disconnect ] PORT INFO: Port closed

    When I reconnected port it lost place and wasted material. Any Idea on cause and or how to recover from this error without loosing place and wasting material.
     
    #408 Arzak, Jun 23, 2019
  19. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    Cant recover unless you know the exact line it died on.

    For the port disconnect, there are a few possibilities. 1 is a sleep or power saving feature for your usb port. The other is EMI.

    Port Disconnect
     
    #409 sharmstr, Jun 23, 2019
  20. Denis Lapratte

    Denis Lapratte New
    Builder

    Joined:
    Jan 4, 2015
    Messages:
    27
    Likes Received:
    8
    Is there any BB documentation (other then the assembly guide) I can download? I'd like a version I can install on my PC when not connected to the net.
     
    #410 Denis Lapratte, Jun 24, 2019
  21. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,049
    Likes Received:
    4,313
    Not at this time, except the longish way:
    Go to docs.openbuilds.com/blackbox
    Click each link on the left in turn
    Click the print button at the top and save each page you are interested in, to PDF using a PDF Printer
     
    #411 Peter Van Der Walt, Jun 24, 2019
  22. thinman

    thinman New
    Builder

    Joined:
    Jul 25, 2015
    Messages:
    7
    Likes Received:
    7
    I can't find a link to the schematic. Is something broken or are my old eyes just getting worse?
     
    #412 thinman, Jun 27, 2019
  23. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    Scroll up and click on the Files and Drawings tab.

    Edit
    For some reason, you need to be in the build tab in order for the Files and Drawings tab works correctly. So, scroll up, click on Build, then click on Files and Drawings.
     
    #413 sharmstr, Jun 27, 2019
  24. thinman

    thinman New
    Builder

    Joined:
    Jul 25, 2015
    Messages:
    7
    Likes Received:
    7
    Got it. Thanks.
     
    #414 thinman, Jun 28, 2019
  25. brab626

    brab626 New
    Builder

    Joined:
    May 10, 2019
    Messages:
    8
    Likes Received:
    10
    i want to to be able to turn my spindle off and on through the software. I have a Huanyang vfd and from what i read all i need on the vfd side is to connect FOR and DCM but im unsure to what pins on the blackbox side. Can anyone help?
     
    #415 brab626, Jun 28, 2019
  26. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    #416 sharmstr, Jun 28, 2019
    Mark Carew likes this.
  27. RV6APilot

    RV6APilot Well-Known
    Builder

    Joined:
    Apr 23, 2019
    Messages:
    29
    Likes Received:
    23
    Love this BlackBox. I have been following @Sean Griffiths VFD wiring diagram and although I have a 110V
    VFD. Just curious if the external relay is really needed to change the direction(fwd/rev), wouldn't the DIR on the BlackBox
    be able to control Fwd and Rev? Just curious as I am hooking up my VFD and do not want to fry anything.
     
    #417 RV6APilot, Jun 30, 2019
    Peter Van Der Walt likes this.
  28. Juan Alonso

    Juan Alonso New
    Builder

    Joined:
    Nov 12, 2018
    Messages:
    5
    Likes Received:
    2
    Hi all, I have finished assembling Blackbox and reading the documentation I see that I have to "adjust the stepper driver current for each axis" could I read any additional indication to verify that the motors have been properly configured? Thank you!
     
    #418 Juan Alonso, Jul 1, 2019
  29. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    Nope. that's the way to do it.
     
    #419 sharmstr, Jul 1, 2019
    Peter Van Der Walt likes this.
  30. Juan Alonso

    Juan Alonso New
    Builder

    Joined:
    Nov 12, 2018
    Messages:
    5
    Likes Received:
    2
    Thank you!
     
    #420 Juan Alonso, Jul 1, 2019
    Peter Van Der Walt and sharmstr like this.
Page 14 of 30

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice