Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

Niko’s EggBot (OpenBuilds)

Discussion in 'DrawBot' started by gianakop, Mar 29, 2015.

Niko’s Egg-painter robot (OpenBuilds)

Niko’s Egg-painter robot (OpenBuilds)

Discussion in 'DrawBot' started by gianakop, Mar 29, 2015.

This EggBot design has a perfect functionality (the same as the original EggBot professional), a perfect cable and microcontroller arrangement, and a perfect cost as it uses a minimum list of parts (with one V-Slot Linear Rail size20mm x 80mm and length 500mm you can build 3 EggBots!)

EggBot Drawbot Sphere bots EiBotBoard EBB
Page 2 of 2
  1. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,015
    Likes Received:
    1,680
    #31 Giarc, May 19, 2017
    stargeezer likes this.
  2. xl97

    xl97 New
    Builder

    Joined:
    Jun 7, 2018
    Messages:
    40
    Likes Received:
    7
    Cant believe I missed this!!

    Have always wanted one of those Egg Bot Pro machines!

    Question(s)


    1.) Anyone got one they want to sell?
    2.) Are -all- parts listed in the parts list tab above? (spring, driver board..etc)... looks like (which makes sense) only the open build stuff/links are listed in the parts list?

    I dont have a problem building one myself.. but I always hate 'ordering' as I always feel I will miss something, being as its not my project and am not that familiar with what is needed..etc..

    Going this route... anyone comment on what the FINAL price was? (for everything? minus your egg purchases? lol)

    The Pro's are NOT cheap.. so I am wondering if this is a cost saver? or just a better build approach?

    Thanks
     
    #32 xl97, Dec 10, 2019
  3. xl97

    xl97 New
    Builder

    Joined:
    Jun 7, 2018
    Messages:
    40
    Likes Received:
    7
    bump!
     
    #33 xl97, Dec 13, 2019
  4. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,015
    Likes Received:
    1,680
    I have one I may be willing to part with. I can even reprint the parts with a better printer. I hadn't responded earlier because nowhere in your profile do list your geographical location and shipping international is more of an obstacle and may not be worth my time. There is a spot in your profile where you can list it.
     
    #34 Giarc, Dec 16, 2019
  5. xl97

    xl97 New
    Builder

    Joined:
    Jun 7, 2018
    Messages:
    40
    Likes Received:
    7
    Sorry I didnt get any notifications to a reply. :)
    I am located in the States.


    Milwaukee, WI. 53154
    USA

    If you can PM a price.. I'd appreciate it.

    Thanks!
     
    #35 xl97, Dec 17, 2019
  6. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,015
    Likes Received:
    1,680
    I need to check with my kids first. We did not use it last year, but I would hate to sell without asking them first
     
    #36 Giarc, Dec 18, 2019
  7. xl97

    xl97 New
    Builder

    Joined:
    Jun 7, 2018
    Messages:
    40
    Likes Received:
    7
    No problem!

    Might be out of my price range anyways! LOL..

    Ask and let me know!

    Thanks!
     
    #37 xl97, Dec 18, 2019
  8. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,015
    Likes Received:
    1,680
    Sorry for taking so long to reply. I forgot over the holidays. My daughter wants to keep it.
     
    #38 Giarc, Jan 18, 2020
  9. xl97

    xl97 New
    Builder

    Joined:
    Jun 7, 2018
    Messages:
    40
    Likes Received:
    7
    :(

    bummer!

    Thanks for the reply though! :)
     
    #39 xl97, Feb 7, 2020
  10. xl97

    xl97 New
    Builder

    Joined:
    Jun 7, 2018
    Messages:
    40
    Likes Received:
    7
    Any estimates on the 'total' price you paid?

    I'm still not fully clear on ALL the things that need to be ordered? (lots of info all over the place, and some of the links in the parts tabs look to be dups? or 404's)

    So In OpenBuild parts.. the rough cost is? Roughly $60 in parts or so?

    Electronics.. Board is another $50 or so?

    Not sure about the 2 steppers ( $50 here.. cheaper on-line I'm sure)..

    How much to the 3D printed parts cost?

    So we're looking at roughly $150-$175 in parts.. brand new?

    Close (guess)timate? :)

    Thanks!
     
    #40 xl97, Feb 7, 2020
  11. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,015
    Likes Received:
    1,680
    I would say your estimate is pretty accurate. I had parts and pieces leftover from my CNC build so i do not have a good assessment of what it cost me. He has all the parts purchased with links in the Parts List tab above. The EBB board is $50. I am not sure how much the 3D printed parts are.
     
    #41 Giarc, Feb 9, 2020
Page 2 of 2

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice