Welcome to Our Community

Some features disabled for guests. Register Today.

loose belt

Discussion in 'CNC Mills/Routers' started by Ryan Anderson, Feb 21, 2020.

  1. Ryan Anderson

    Builder

    Joined:
    Aug 14, 2019
    Messages:
    1
    Likes Received:
    0
    I have a workbee 1510, it is belt driven on the X and Y Axis.
    The belt for my X-axis will not stay tight. I will pull it tight on both sides of the machine, screw it down as tight as I can. As soon as I jog the machine along the X-axis the belts are pulled loose form the belt tensioners and the machine will not move.

    Help please
     
  2. Gary Caruso

    Gary Caruso OpenBuilds Volunteer
    Staff Member Moderator Builder

    Joined:
    May 19, 2016
    Messages:
    1,193
    Likes Received:
    532
    Hi Ryan, you are using the "track nut and set screw" setup to clamp the belt down?
    Some people have put a thin strip of metal or plastic like a strip of hotel door key under the set screw to keep it from cutting into the belt and loosening up.
    Cheers
    Gary
     
  3. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,050
    Likes Received:
    4,313
    Does the carriage move easily? Or is it binding, and thus unduly putting too much force on the belt? (fix the binding first if thats the case)
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice