Huanyang VFD 220v 2.2KW Water Cooled Spindle I have been over the settings and I just can seem to find the one for this. The spindle will only go up to 200hz or 12000 rpms Here are some of my basic settings PD001=1 PD002=1 PD003=400 PD004=400 PD005=400 PD008=220 PD070=0 PD141=220 PD142=9 PD143=2 I have also tried to set it up to be controlled by Openbuilds control with the black box but have yet to get that to work ether. I am starting to think I have a bad VFD.