Hello all, just finished building my Lead 1010 machine. I am going through trying to test everything and the Z axis is not responding. The motor appears to have no power going to it. The other axis jog just fine. On the black box the LED for the Z is lit up. Any help would be appreciated. Thanks
Indicates - overcurrent (adjust current down) - overtemp (adjust current down, check fan, check heatsinks are installed) - short circuit (check wiring) - low input voltage (check PSU is delivering 24v)
I have checked all of those except the voltage from the power supply. I will check that and report back. Thank you.
Swop in X motor onto Z too just as a check of the wiring etc And remember to power cycle the board to clear the error
I I checked the power supply and its showing 24.13. I tried to swap the wires and it did not change. I even unhooked everything and turned it on and the Z light still comes on.
Alright, thanks for the tests please email http://support.openbuilds.com/support/home to request an RMA for a replacement Muscle board, please include a link to this thread to help expedite the request (Testing already done above)
Just want to let everyone know I got a new box and everything is working great, great customer support. Thanks for the help everyone.
