Separate names with a comma.
Some features disabled for guests. Register Today.
"It will get cut" is an understatement, high risk of infection, when the jet hits bone it will dissipate causing more damage, i have seen the...
Unfortunatly my VFD has different setting to the huanyang but theres less of them
My spindle is now under control from BCNC, it was easier than expected. I made a circuit with a lm358 to turn 5v pwm into 0-10v which works...
I did notice i cant get the full 400hz but i dont think im going to need 24000rpm Thinking of running an op amp anyway so this may fix it
I now have my VFD and its not quite what i expected, its a isacon which looks to be a copy of a huanyang, ive looked at thee pcb etc and it looks...
My 0.8kw and VFD are on ther way and i need to start thinking about wiring the thing up. Im happy enough with the main wiring shielding ect but...
Another small but significant update, It's alive, wiring is just chucked in at the moment but drives ok, Bcnc ok and even managed to get the...
Some more progress today. Stripped the machine down and rebuilt with the aluminium plates. As you can see from the pics I've added an extra beam...
Just a small update. Plates have been cut and are ready, only had 8mm so slight alteration to some bolts. Spent quite a while deciding on which...
I don't know bcnc but I had the same on a 3d printer, Sounds like your homing in the wrong direction hence the backwards text
Originally I wanted to cut 400 x 400 but after working out all the sizes and what I could get out of the lengths of c-beam and leadscrews it was...
adambrum published a new build: Another C-Beam Sphinx but a little larger, Read more about this build...