Separate names with a comma.
Some features disabled for guests. Register Today.
Hello, Was wondering if anyone could tell me how to use a touch plate with the Xpro. I am also having a problem with my SS relay. I have connected...
With the flipped X and y gantry what is the total usable surface size? I am highly considering pursuing similar mods to you as the exposed lead...
I would leave them dry. Especially if your lead screws are exposed like the stock build. Will attract a lot of chips instead of them just falling off.
It was done with 2 bits. Main cuts were done with a 3/32 HSS end mill at 20ipm .01" no finishing pass. The chamfer was done with a 1/8...
Got my issue figured out. Turns out the y axis backlash nut needed to be re tensioned. Getting great results now! Getting a tiny bit of chatter on...
Ill give 20 ipm to see if i get better results! Never thought of using climb milling for the finishing pass
Beautiful results @Kyo
Hello Everyone! Hoping someone will be able to help me solve some issues I am having with my machine when cutting aluminum. I think it could be a...
Very Nice. What are you using to cover the area under the work surface? Looks like a piece of aluminum.
I like the improvements you have added to your build! I am really hating the exposed lead screw on all of the axis. Since I do a lot of wood and...
It all makes sense now, the version of sketchucam that I had was older and did not have hole feature options. I deleted a installed version 1.4...
okay its not me then. My help menu looks different and does not have that option.
Thanks for the help. I now see where I went wrong. The bit i am using is slightly larger than 3 mm so I changed the specs and re made the outside...
Hey everyone, for some reason I am having all kids of trouble generating the G code for this park using sketch U cam. I have been following marks...
