Separate names with a comma.
Some features disabled for guests. Register Today.
Max RPM on a bosch colt using a helical pattern generated by fusion 360. I can't seem to control the plunge rate of that so I can't really give a...
Does anyone have an issues with the z-axis flexing axially? I just tuned my acceleration and max speeds based on the grbl wiki reference and it...
@Moag I'm using all lead screws with anti-backlash nuts. You've nailed it with saying to use a thick spoiler board, I've been doing that for all...
I just want to give a word of warning about the z-axis in that configuration. I've been getting a lot of chatter on aluminum when the z-axis is...
Could you give a quick run-down of how you created that toolpath? I've been having issues with deep chamfers and I can't get it to make multiple...
Reporting back. Removing the bearings fixed the oscillation for sure, it's less stable and much noisier. I'm still maxing out at 1/64th step at...
It's the 890kV motor described in this project running on a 12V 40A meanwell power supply adjusted up to 13.9V. According to the math, I should be...
Looking for some help on this build. I've built this setup using a mystery cloud 80A esc and a servo tester, but it seems like my RPM isn't as...
