Separate names with a comma.
Some features disabled for guests. Register Today.
I have a few questions about finishing a piece that was cut. I make monograms with my router, and after I'm done I have to spend a ton of time...
Thanks so much for this. I've been struggling to get my machine set up with Tinyg. I was wondering if you may be able to help me out with...
Thanks for getting back to me. I have a pretty busy weekend ton finish out so i Won't be able to test anything out for a few days but I will as...
Thanks for the reply. I will go through and check everything out. As we speak its cutting .5" ply at 50ipm 1/16th pass depth without a hiccup. I...
Tweakie, I just did what you said and the tool position is about 1/4" to the left and maybe 1/8" +Y from the original starting position. Do you...
Hey! So I thought I had all of this worked out, but apparently not. I've tried to cut the same shape about 10 times now, and every single time...
Hey, Just got my router all set up and i'm attempting my first few cuts. I decided to cut out a horseshoe with the letter B in it to see what I...
Yeah sorry I meant the tinyg. I was searching around trying to figure out how to configure mine. I made a change in mine and now it jogs really...
That's what I thought at first but the eccentrics don't touch the plate. They sit in the spacer block. Plus the holes for the eccentrics on the...
Well I contacted inventables and they contacted the TinyG folks, and figured it was a bad board so they are going to replace it. Hopefully it'll...
What kind of settings are you running in Chilipeppr?
Hey guys, first post and first ever build so I really have no clue what i'm doing. I opted for a 1000x1500 machine, and I have everything put...
