Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks, Peter. I will give it a try today.
Actually I wanted to use the IOT relay for the spindle water pump so it sounds like I can just connect the IOT to the coolant output?
How do I connect both the IOT and a 0-10v VFD to the Blackbox?
I changed the machine to lead screws with the two blocks on both side so backlash shouldn't be an issue. The motors are Stepperonline Nema 23...
Sorry, pass-through pins, not bridge. I can put my Acorn CNC on the machine and it works perfectly so it's not the machine.
I spoke too soon. Worked fine for a couple of passed then Y2 stopped working again. My understanding is the Blackbox has a Y bridge issue so I...
FYI Received replacement Blackbox and Workbee works now. The entire time the issue was the controller.
I have been trying to get my Workbee 1510 to work from the time I got it a few weeks ago. I have replaced all the wheels, belts and upgraded the...
Can external stepper motors be used with the Blackbox? Something like TB6600.
I replaced all the belts with lead screws and the Nema 17 motors with Nema 23 and it still has an Y axis issue. I suspect the blackbox is the issue.
Hey Guys which wires do I swap to reverse a stepper motor?
I took the belts off the Y axis and rolled it back and forth. Below is a video. [MEDIA]
