Separate names with a comma.
Some features disabled for guests. Register Today.
My CNC runs on a Teensy4.1 with GRBLHal. I had a similar problem where the Teensy only gives out 3.3V PWM (or something like this). I googled the...
Robbie, I wonder why would you expect control to 'see' the ESP32 on the WiFi? I have a clock, that I made, with a ESP32 that checks the time via...
You better put a bucket under the PSU, to collect the electrons, and a perpetual motion pump or you'll run out of electrons eventually....
I use them too. I have a bunch of them. 1 for every collet that I have. I bought them on AliExpress. Way cheaper than on Amazon!
When I built my CNC I, like many, thought that the bigger the better and bought a 1.5KW spindle. I quickly found out that I had bought a way too...
Swarley, I had a very similar problem. After trying to find the problem for hours and hours, it turned out to be that my E-Switch was pushed in...
I can't tell from the pictures what kind of cable carrier you have. My X axis has a capacity of 48" cutting. That means that the overall size of...
Put a bit into the spindle and try shacking the gantry by the bit. See if there is movement. If there is try to tighten it at the spot where it moves.
Matt, is the option of a counter weight for the heavy Z axis an option? May be a little fiddley to install but will eliminate your sagging problem.
Is there a log file stored somewhere where I can see more info? I have an error all of a sudden (error 2, no response from the controller, closing...
I use only SketchUcam for my CNC projects. It has the G54 in it. My way of operating my machine, and I've been doing it for years without any...
I'm trying to wrap my head around the 54 and 55. So G54 is after the homing and G55 is after setting all axes to material 0?
John, that moves out a lot. What will prevent it from leaning down, at max extension, with the material on it?
As Peter said but maybe use construction adhesive, also known as liquid nails, instead of the silicone.
