Separate names with a comma.
Some features disabled for guests. Register Today.
Just revisting speeds and feeds...Making sure I am understanding... I cut pine and MDF...I use a Makita router at 30000 rpm and carbide two flute...
The "twisting" of the two beams is the very reason I am rebuilding/strengthening my Ox...I am replacing the the two 20x80's with a C beam. I was...
The first things on my mod list are to make the X axis stronger (less flex) and to gain more clearance between the router and the table...raising...
Been using my 1000mm x 750mm Ox for several months now...recent upgrades include a Gecko 540 controller, Mach3, and a nice electronics box......
I got mine from Amazon...really happy with it... 15mm x 30mm Black Plastic Semi Closed Drag Chain Cable Carrier 1M
I have been using the Gecko 540 for a few weeks (swapped out the TinyG). Finally got my control box and wired it up tonight...the box is from...
I need M3 for some 15mm linear rail! That is the size of the mounting screws. Thanks Rick Danym I could use about 40 if you have that many let...
Anyone know where I can get some M3 t slot nut plates for v-rail? SWD3D used to sell them but they are out and not getting any more... An internet...
Nice thread...lots of great info...I have been using my Ox clone (1000x750mm) for a few months and am going thru the plans to...
The issue is two solid state devices...see the link below... TinyG struggling with spindle relay | OpenBuilds
I have run a max of more than an hour, did not measure the temps but did not feel hot, no issues...
