Separate names with a comma.
Some features disabled for guests. Register Today.
I have some good news!!!! it seems to be working now. At least it is finishing the jobs like it supposed to. I did have a problem with probing...
It looks like the Black box processor did produce negative Z number for G53. Below is the gcode for the 1/2" bore operation. Do you see...
Interesting! I was using the standard GRBL Post processor in Fusion 360. Can I use the Black box version on an Arduino Uno controller? I...
Yes firmware is up to date. When I started it up two days ago it automatically did a firmware update. Unless it has changed since then? I'm...
I just ran it again with the interface controller. Here is a screen shot of the work, You can see the 1/2” bore in the middle. I ran the job...
Lol, What you said makes complete sense! Except it’s not working…. I have had this machine for years. The limits are set correctly as I am...
Thanks Peter. Actually in grbl, my limits are very large. The machine is 33”x14”x10”. Approx. I have the correct settings in grbl, as I am...
I did some more testing with some of the grbl settings. If I disable soft limits, it runs the program just fine! It finishes with no errors....
Thanks guys! I tried it again today. After homing, I disconnected the endstops and tried running a program with the router turned off and...
I am using homing limit switches. But just ones I ordered from Amazon. They don’t have any filtering. What type of filter, and can I add...
The power cord is in the same drag chain for the router, z axis and Z endstop yes. I tested it with the router unplugged. And it still did it....
So I’ve been running into an issue I think is caused by some type of EMI. At least that’s what I’ve been reading based on other posts. I’ve...
Thanks Peter, I'm sorry to be such a PITA. Yeah, it sounds like you understand what I'm running into. Unfortunately, I'm using the Interface...
Yes, but when you issue the probe command, if its too close to the limit, then it will throw and error, because it thinks you are trying to move...
