Separate names with a comma.
Some features disabled for guests. Register Today.
Is anyone interested in doing a 16mm ballscrew variant of this design?
Hi Everyone, I have a C-Beam machine which I built 6 months ago and I have run out of creative ideas of things to build using my machine. I have...
Sonny for chillipepr you can run the serial server on the rPi and then connect to it using another browser running on the local network. This way...
You were right about my bit, speeds and feeds. I setup just like in my post (G-Code Help) and cut a 1.5x scaled version of Kyo's keyring. Thanks...
And the stock was 9mm scrap ply.
*18000 rpm
Thanks for your insights. I guess I didn't set G54 and G28 correctly and I used too few passes. The bit was a 4 flute HSS end mill, 5mm diameter...
That seems to be an issue, chilipeppr uses G92 X0 Y0 Z0 as the 'zero out' button I keep using. I'll switch to UGS. I'm not sure what I have done...
Success! Thanks David
Okay, I've read these: G28 G-Code: Return to Reference Point G Codes G-Code - ShapeOko Part Zero, Program Zero, Touch Offs, and Zeroing for CNC...
I have read through your reply and the links a couple of times now. I'm still unsure how to set G28 in step 4 of your solution.
Thank you for your reply! I don't have limit switches and have been clueless about the coordinate system thus far. I use chilipeppr's 'zero out'...
This is the beginning of my analysis. I don't see anything wrong. % (0005) (Extruded Rob trace v4) (T1 D=3 CR=0 - ZMIN=0 - flat end mill) G90...
Hi everyone, I had some trouble trying to engrave my name on my new C-Beam, please see attached. I don't yet understand G-Code and would...
