Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

OX CNC SMW3d 1500x1500

Discussion in 'CNC Mills/Routers' started by Jeremiah Guinn, Sep 25, 2017.

OX CNC SMW3d 1500x1500

OX CNC SMW3d 1500x1500

Discussion in 'CNC Mills/Routers' started by Jeremiah Guinn, Sep 25, 2017.

A small business idea led us here, lets see where it will go.

cnc router opensource smw3d beginner
  1. Jeremiah Guinn

    Jeremiah Guinn New
    Builder

    Joined:
    Aug 30, 2017
    Messages:
    3
    Likes Received:
    2
    Jeremiah Guinn published a new build:

    Read more about this build...
     
    #1 Jeremiah Guinn, Sep 25, 2017
  2. Anthony Bolgar

    Anthony Bolgar Journeyman
    Builder

    Joined:
    Jan 14, 2016
    Messages:
    354
    Likes Received:
    198
    Don't worry about your dated skill set. It has been about 20 years since i worked with anything CNC and I was able to build an OX CNC without any issues. If you get stuck ask for help, someone will come to your aid (Most likely multiple someones) And most builds have been documented very well, along with long discussion threads dedicated to solving issues and adding features etc.
     
    #2 Anthony Bolgar, Sep 26, 2017
    Jeremiah Guinn likes this.
  3. Jeremiah Guinn

    Jeremiah Guinn New
    Builder

    Joined:
    Aug 30, 2017
    Messages:
    3
    Likes Received:
    2
    Awesome to hear from someone thanks Anthony. When i come back from vacation im going to finish it up. I think assembly is the easy part!
     
    #3 Jeremiah Guinn, Sep 26, 2017
  4. Gary Caruso

    Gary Caruso OpenBuilds Volunteer
    Staff Member Moderator Builder

    Joined:
    May 19, 2016
    Messages:
    1,193
    Likes Received:
    532
    The hardest part for me was finding free to cheap software that i was happy with and performed well, at first it was quite a struggle, now i'm in a happy place :)
    Good Luck with your build!
    Gary
     
    #4 Gary Caruso, Sep 26, 2017
    Jeremiah Guinn likes this.
  5. Jeremiah Guinn

    Jeremiah Guinn New
    Builder

    Joined:
    Aug 30, 2017
    Messages:
    3
    Likes Received:
    2
    Thanks for having a look Gary, glad to hear you are doing well with your machine! Hope to be in a happy place asap with mine as well!!
     
    #5 Jeremiah Guinn, Sep 26, 2017
  6. bryan robbins

    bryan robbins New
    Builder

    Joined:
    Jun 5, 2021
    Messages:
    20
    Likes Received:
    0
    can i ask please i have an ox cnc black box 1500/1500 im just trying to set it up but need to add the workspace ie work area y and work area x could you please tell me
    thank you
    bryan
     
    #6 bryan robbins, Sep 2, 2021
  7. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,758
    Likes Received:
    2,440
    As I remember, I believe the travel cutting area of the 1515 sized OX was:
    X Axis: 1320mm
    Y Axis: 1275mm
    Z Axis: 69mm
    Hope this helps
     
    #7 Mark Carew, Sep 2, 2021
  8. JustinTime

    JustinTime Veteran
    Builder

    Joined:
    Dec 18, 2013
    Messages:
    784
    Likes Received:
    259
    I measured mine by jogging the axis to the limit switch but not crashing it. I laid out a tape measure and then chose a point , any point you want, on the gantry. I then jogged to the other end to a point just before it hits the end of the machine and measured on the tape the distance traveled. I put that into the program.
     
    #8 JustinTime, Sep 2, 2021
  9. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,015
    Likes Received:
    1,680
    I can confirm the Y is 1275. Well, actually I squeezed another mm out and it is 1276 on mine.;)
     
    #9 Giarc, Sep 2, 2021
  10. bryan robbins

    bryan robbins New
    Builder

    Joined:
    Jun 5, 2021
    Messages:
    20
    Likes Received:
    0
    thank you very very much i will give it a try
     
    #10 bryan robbins, Sep 19, 2021
  11. bryan robbins

    bryan robbins New
    Builder

    Joined:
    Jun 5, 2021
    Messages:
    20
    Likes Received:
    0

    thank you if you have this machine can you tell me what cutting size of machine total also what point is the homing corner
    also what Gcode sender are you using i really appreciate your help
    bryan
     
    #11 bryan robbins, Sep 19, 2021
  12. bryan robbins

    bryan robbins New
    Builder

    Joined:
    Jun 5, 2021
    Messages:
    20
    Likes Received:
    0
    do you have the ox pro openbuild 1500 / 1500
    what software are you using a really appreciate your help
    thank you
    bryan
     
    #12 bryan robbins, Sep 19, 2021
  13. Gary Caruso

    Gary Caruso OpenBuilds Volunteer
    Staff Member Moderator Builder

    Joined:
    May 19, 2016
    Messages:
    1,193
    Likes Received:
    532
    Bryan, my Ox is custom plates, HD Ox 1500x1000. Can see my build on my page, since the build I switched to a Blackbox.
    I had a lot of experience with Autocad so now I'm using free Nanocad 5.0 (like an autocad clone) and ESTLcam for cam and its built in sender with Blackbox.
    Cheers
    Gary
     
    #13 Gary Caruso, Sep 19, 2021
    Giarc and Rick 2.0 like this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice