Is there a macro or modified version of the control software that allows you to choose the long axis of movement in the surfacing wizard? My open builds has a smaller X than Y axis (how I received it) so when I'm planing boards the wood grain usually goes in the Y direction and I'd prefer the surfacing option to go up/down vs side to side. Feels like something that should be in the software but some searching I have seen others mention it and no clear fix other than create a macro or modify the program. Before I dig in to that myself, I thought I'd see if someone has fixed this.
I would just create a drawing and generate my own Gcode for it, that is all the wizard is doing. For fun I just tried it. open sketchup, draw rectangle the size of my bed, set parameters (19mm bit, 0.5mm depth), add pocket cut, generate gcode. Took 2 minutes 35 seconds to get to a Gcode preview.
Added to the todo, thanks, good suggestion X or Y direction Surfacing · Issue #375 · OpenBuilds/OpenBuilds-CONTROL
