Welcome to Our Community

Some features disabled for guests. Register Today.

Vacuum chuck

Discussion in 'CNC Mills/Routers' started by Greenman, Jan 23, 2014.

  1. Greenman

    Greenman New
    Builder

    Joined:
    Jan 21, 2014
    Messages:
    63
    Likes Received:
    19
    I wanted to post a picture of a vacuum from Joe woodworkers website. It is shop made and it vacuums on the top and bottom. So it is locked to your table. Each one of the four areas in the block has a ball bearing valve. When you put on your piece it depresses the ball and pulls a vacuum. I use vacuum clamping and holding in my guitar making. I have a venturi system I built as a kit that runs off my compresser and a continuous run Gast pump I got on ebay for about $60. Both work great a lot faster that hand clamps or screws to hold things down. main.jpg
     
    bobt likes this.
  2. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,758
    Likes Received:
    2,441
    What a great idea @Greenman , thanks for sharing
     
  3. bobt

    bobt Well-Known
    Builder

    Joined:
    Dec 4, 2013
    Messages:
    89
    Likes Received:
    38
    @Greenman, Can you post a link to the vacuum clamp and the venturi that you made. Or just post a project for these as there are a lot of us that would like to use this on their tables.

    Bob
     
  4. Greenman

    Greenman New
    Builder

    Joined:
    Jan 21, 2014
    Messages:
    63
    Likes Received:
    19
  5. Greenman

    Greenman New
    Builder

    Joined:
    Jan 21, 2014
    Messages:
    63
    Likes Received:
    19
    What I built is the V2
     
  6. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,758
    Likes Received:
    2,441
    Thanks for the link, cool site!
     
  7. bobt

    bobt Well-Known
    Builder

    Joined:
    Dec 4, 2013
    Messages:
    89
    Likes Received:
    38
    Thanks @Greenman - and my wood/metal/cnc shop thanks you more than you know. Just what I need is another project. YES!!! It is on the list now.

    Bob
     
    Mark Carew likes this.
  8. Greenman

    Greenman New
    Builder

    Joined:
    Jan 21, 2014
    Messages:
    63
    Likes Received:
    19
    Joe Woodworker is good to work with. His prices aren't a rip. I built the V2 and it was pretty easy works good. I am thinking of building a tanks system for my Gast pump so it doesn't have to run constantly. The other thing he has is a foot switch to turn the vacuum off and on. That is worth checking out.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice