Welcome to Our Community

Some features disabled for guests. Register Today.

is there something simple

Discussion in 'CAD' started by edward siegel, Apr 29, 2015.

  1. edward siegel

    Builder

    Joined:
    Mar 9, 2015
    Messages:
    49
    Likes Received:
    12
    is there a cad program that's easy to learn
    this stuff will make you pull your hair out im trying to draw a side and top profile of a 32 for frame I have a 30 x 40 blueprint with measurements in quarter scale im having no luck at all
    I tried libre cad now im ready to get drunk and call it a day grrrrrrrrrrr
    I just want to draw this and run it through cam so I can start cutting
     
  2. John Williams

    Builder

    Joined:
    Aug 25, 2014
    Messages:
    8
    Likes Received:
    1
    the one program I fell in love with was solidworks/cam. I also use inventor. I tried sketch up, however i do not like the interface for direct input of dimensions. i do not etch a sketch, i type my ccords directly. you could try freeCAD.
     
  3. John Meikrantz

    John Meikrantz Well-Known
    Builder

    Joined:
    Nov 2, 2014
    Messages:
    169
    Likes Received:
    56
    I finally wound up with ViaCad after similar struggles. It was the easiest for me to learn. I started with 2D and upgraded to the Pro version.
     
  4. edward siegel

    Builder

    Joined:
    Mar 9, 2015
    Messages:
    49
    Likes Received:
    12
    id love solid works but I don't have 3500.00 poor man budget here.
    ive never heard of via cad
    all I need it 2d for now im drawing flat plates to cut on a plasma table
    witch is giving me fits at the moment I cant get my proma thc to work properly it moves the z axis up and down in test mode but when I try to run a program it stops any movement its not rf either ive tryied it with out the plasma cutter on at first I thought here we go im buying a 2200 dollar hypertherm but I left off the plasma cutter
    and it still did it I have a software glitch somewhere ive tried allot od settings in mach3 but no luck yet
     
  5. Joe Santarsiero

    Joe Santarsiero OB addict
    Staff Member Moderator Builder

    Joined:
    Oct 30, 2014
    Messages:
    902
    Likes Received:
    196
    Try Onshape.
    I think the easiest route for 2d work is just writing the G code myself. No cad/cam needed.
     
  6. Texflyboy

    Texflyboy New
    Builder

    Joined:
    Nov 15, 2014
    Messages:
    4
    Likes Received:
    0
    You might also consider Fusion 360. I find it to be very intuitive and much more capable than sketchup. You have a lot of control over your tool-paths if you want to tweak them. There is a free trial and after the trial you can continue to use it for free if you are not using it commercially.
     
    #6 Texflyboy, May 9, 2015
    Last edited: May 18, 2015
  7. Joe Santarsiero

    Joe Santarsiero OB addict
    Staff Member Moderator Builder

    Joined:
    Oct 30, 2014
    Messages:
    902
    Likes Received:
    196
    Fusion 360 is nice. I use it. I wouldnt consider it simple though.
     
  8. Ryan James

    Builder

    Joined:
    Sep 8, 2014
    Messages:
    41
    Likes Received:
    15
    I've been playing with Fusion 360 this weekend. Not a lot, just to get a slight feel for it. One thing I like about it over Sketchup (which I know fairly well) is the grid. If Sketchup has a grid, I haven't figured it out yet.
     
  9. Val Cocora

    Val Cocora Well-Known
    Builder

    Joined:
    May 19, 2014
    Messages:
    172
    Likes Received:
    28
    you might want to try autocad, it's intuitive and if you understand geometry, you're game. precision wise, goes up to 8 decimals, 16 internally. it's also preset for metric or imperial, so another bonus.
    last but not least, it exports directly to stl, no more hassle.
    have a beer and enjoy life while your solid file is woven on the screen.
     
  10. sw3Dp

    sw3Dp New
    Builder

    Joined:
    Apr 26, 2015
    Messages:
    29
    Likes Received:
    8
    Onshape or fusion360 are the best looking new free cad out there with the added benefit of progressive development but it means a bit more time in the youtube pits and hoping they come of age before they sell out like sketchup. That being said solid works and inventor are the best and easiest to learn for working with solids but they ain't free ... for long.
     
  11. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    Absolutely excellent work Robert. :thumbsup:

    Tweakie.
     
  12. Jimmybuckets

    Jimmybuckets Well-Known
    Builder

    Joined:
    Aug 15, 2014
    Messages:
    234
    Likes Received:
    36
    I like MOI3D nurbs based. Moi3d.com
     
  13. Traxxtar

    Traxxtar New
    Builder

    Joined:
    Nov 20, 2015
    Messages:
    56
    Likes Received:
    15
    Trying to create text that follows a circular path in any program.... Is there a way to do that easily??
     
  14. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,762
    Likes Received:
    2,446
    You may want to give Inkscape a try
     
  15. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    Perhaps also look at F-Engrave - free and extremely easy to use with the ability to import fonts etc.

    Tweakie.
     
  16. Traxxtar

    Traxxtar New
    Builder

    Joined:
    Nov 20, 2015
    Messages:
    56
    Likes Received:
    15
    I'm very surprised none of the CAD programs I've looked at have this ability native/built-in. It's a bit shocking really. The 'text' tools really need work in those programs.

    Thanks for the link, I'll take a look at Inkscape. I've seen it mentioned on many sites for various things, just never looked at it.
     
  17. Val Cocora

    Val Cocora Well-Known
    Builder

    Joined:
    May 19, 2014
    Messages:
    172
    Likes Received:
    28
    I believe Autocad has a function to wrap text around an arc/path. In express tools, select arctext command
     
  18. Traxxtar

    Traxxtar New
    Builder

    Joined:
    Nov 20, 2015
    Messages:
    56
    Likes Received:
    15
    Is there a free version? ;)
     
  19. Val Cocora

    Val Cocora Well-Known
    Builder

    Joined:
    May 19, 2014
    Messages:
    172
    Likes Received:
    28
    indeed, autocad is not free, unfortunately.
     
  20. Flash22

    Flash22 Well-Known
    Builder

    Joined:
    Sep 1, 2015
    Messages:
    159
    Likes Received:
    42
    fusion 360 can do text on any path - 360 does take time to learn but you can get some really complex shapes

    Fusion 360 is free for hobby use

    something I put together in 15 min or so

    [​IMG]
     
    Mark Carew likes this.
  21. Julius

    Julius Well-Known
    Builder

    Joined:
    Nov 13, 2015
    Messages:
    193
    Likes Received:
    61
    use the tape measure tool, or I think there is a plug in to create one. Rhino has a grid on at all times, I don't like it.
     
  22. Ryan James

    Builder

    Joined:
    Sep 8, 2014
    Messages:
    41
    Likes Received:
    15
    Just loaded a Grid extension from the Sketchup Team. It allows you to draw your own grid using guidelines. It's under tools so now I just have to figure out how to get it onto a toolbar. Seems to be OK. Have to play with it some more now.
     
  23. Julius

    Julius Well-Known
    Builder

    Joined:
    Nov 13, 2015
    Messages:
    193
    Likes Received:
    61
    Just make a grid as a compenent, and then save the blank grid as a new template, and you'll always open up to it for a new file, or can copy paste it into any current work.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice