hey man this looks awesome ! could you tell me the dimensions and cost of the build thanks

 

Nice build. I'd like to see how you put that enclosure together as I plan to do something similar with mine.

 

Thanks for posting those pictures. Is that a relay I see to control the router on/off through software? I'll be using the same router and have plans to do that when building my enclosure.

 

Hello Jake!
I'm extremely impressed! I am very new to all of this (CNC's that is) and I was hoping I could get a helping hand/advice. I have all my Ox parts on the way except for a spindle mount, and the switches. I would love to be able to copy your controller box setup if that's ok, it looks very clean and in order.
I have several questions if you don't mind. Otherwise I apologize in advance!!
1)What size stepper are you using for the Z-axis, I plan to use my Porter Cable 892, and I'm worried the Nema 17 won't suffice.
2)Were did you get your spindle mount?
3)Did you cut the panels for the controller box with your CNC?
4)Also, do you have a .skp or .dxf file you could share if so?
5)Are the illuminated switches on the front momentary and what are their specs?
6)What type of plugs on the front did you use for the motors/limit switches (they look like 4 pin aviation plugs)?
7)Are you slaving the second Y-axis or using "<A> Motor" on the XPro?
8)What software are you using?
Last question I promise!
9)Where did you get everything for the controller box that isn't on the openbuilds part store?

 

I have the same question #6 - what kind of connectors or those?

 

Thank you Jake! That was very helpful. I am still curious about some of the wiring. I have the 12V 30A DC power supply.
1)Is there any advantage to using ATX?
2)Could you take a picture of the back panel with specs on the outlets and switches? I'm assuming you have a power switch on the back and I saw the E-stop on top? Can you explain the wiring of the back switches, etc.
3)Could you explain the wiring of the pause, start, reset buttons, I see where the white/green/black plugged in, but I couldn't see exactly where the red and black went from the photos (probably me, your photos are great!) If it isn't too much trouble, could you explain all of the wiring in terms of everything except the steppers, I'm just worried about my ability to wire a power switch and E-stop, which leads to my 4th question. I apologize for redundancy, I'm just trying to get all the question I have in my head on the screen, and worried I am forgetting something I might need help with, and that I am asking to much of you.
4)I'm also curious how I can wire a power switch and E-stop with the 12V 30A DC power supply instead of the ATX. I have looked at the wiring diagrams of CNC xPro, and the LED switches worry me, but I definitely want LED buttons.
5)Should I use 24V or the ATX power supply?
6)Can you explain the Buffered Output (N-MOSFET) and Buffered Output (NPN Darlington)? What are they for/what do they do?
7) Take your time on a DXF or SKP or whatever format you have access to for the controller box, but what is the length of the box? I have access to AutoCAD and Sketchup, so whatever works for you, I'll find a way to accommodate to you, I can't tell you how much I appreciate all of your help!
Lastly!
8)Where did you get the plugs for the momentary switches/E-stop & stepper motors, did you just cut off the ends from the steppers.

Once again, I apologize for redundancy and the multitude of questions. I promise I'll pass the knowledge you are giving me along to the next Openbuild-er who needs help, and I'll definitely refer to your build as my goal/inspiration, its awesome!

 

Where did you get the grey and black wire conduit for the aviation plugs? I have searched everywhere and can only find heat shrink. Please Help!!

 

Nice electronics housing. If I wanted to learn more about making enclosures like that and proper wiring setups where would I look? I've just been playing with this rep rap stuff and cars, but I need to get on your level! lol