What driver board have you got? - and what main board are you using with those drivers
are you getting any resonance?
and which if any Heated Bed?

 

@Kyo Thats an awesome mod! Any chance of getting one for the X axis too? I wanted to do it but my CAD skills are quite lacking...

 

Great, looking forward to it! Thanks!

 

I cant find B slot rails, can I use T slot for replacement? The V slot I will get from open builds...

 

2 10 start 25mm pitch fast lead screw and nut http://trinitylabs.com/products/10-start-25mm-pitch-anti-... 200$ (2 x 100$)

Also where can I find that and why so much?

 

@Vxxs

Thats what I did for mine. Just make sure you can find the matching tee-nuts for the t-slots.

 

I bought mine from robotdigg.com

 

Oh ty ty, what about the threaded rod? What size and thread is it? This will be my first diy build.... ty for the help

 

I'd recommend reading through all the pages of this thread. But for the stuff I picked, take a look at posting Lautr3k | Page 11 | OpenBuilds onward. It includes the screws I bought and the stl files I modified for the different parts. They are 8mm screws, not 10mm but they seem to be working okay for me. If I can to pick again, I might I would have went with larger motors for the screws.

 

No new builders? Thats a shame

 

Hello guys,

long story short: I decided to make a 3D printer with a Laser diode also for engraving and cutting soft materials, I like this design and also seen the specs are quite nice: 100mm/s printing - 150mm/s travel speed . Can you guys tell me if I can achieve this speed with a RAMPS 1.4 kit or only with the 5XC Smoothieboard.

The speed is one thing i keeped ignoring 3D printers as I heard things like 10 hours for a part wich for me sound very very much. for example I asked a guy who has a 3D printer locally how much will cost to print me all the parts I need for this design, and he gived me very detailed xls file with each part, the total time needed for printing all parts was from 74 hours (50% infill) to 104 hours (90% infill) !!!! this is too much for me I asked him about what feeds he uses and he sent me a printscreen of the Cura software, and the speeds ware from 20mm/s to 35mm/s and 70mm for travel. Seeing this I knew with Lautrek printer I can do parts much faster than that .. but I need to know what I need to print at that speed as I really want to print that fast.

Thank you in advance!

 

Great work as always but the motor end does not have enough room for the motor body. All the holes line up but the area fro the motor body as not wide enough. I tried scaling, but then all of the holes were off.

 

Thanks, printing now,

 

I already have a large CNC, and when I need to mill aluminium with very fine details, with a 0.8mm endmill I have to set the feed very very low .. I hate how long it takes, and this is what I try to avoid with this project, I want to have it print as fast as possible without spending way more for the speed increase. I think I will be happy with 100mm / s but I don't know for sure what hardware I need to achieve this speed and good results in the printed parts. I seen now the C-bot and noticed it's a combination of belt drive and leadscrew, I don't know why I like more the lead screws, maybe because the CNC is exactly the same. Is the belt system running faster ?

1. Are the NEMA17 powerfull enough ?
2. The A4988 drivers can run the NEMA 17 that fast ? (I don't mind adding another cooler over the drivers part)
3. Can the RAMPS1.4 controller run that fast ? or
4. I need to buy better boards like MightyBoard (Sailfish firmware specs 120mm/s) or Smothieboard ?
What others suggestions do you guys have ?

I was thinking maybe at the beggining to start with RAMPS and buy later a better controller

 

If RAMPS is capable of 100mm/s than I will go this way minimizing the startup cost, I found kits with the DRV8825 on ebay like this one , if anything is not ok with it please let me know so I won't order it 3D Printer Kits RepRap DRV8825 RAMPS 1.4 Iduino Mega R3 LCD 2004 12864 display

So most guys here build the Lautr3k with NEMA17 motors ?

 

Anyone have a Wades_L3K geared extruder for a 1.75mm E3d V6, that will bolt to the X-carriage front plate? All I can find have the 4 holes on the corners, not the diagonal holes on the Lautr3k front plate. I would like to use my Volcano on this build.

 

Looking for the .stl not the actual part.

 

I'm having some troubles getting the parts from misumi, and I was thinking to get the lead screws from ebay (China/HongKong) , but I can't find a leadscrew with such a high lead, are there any other places to get that lead screw ?

Also in the BOM file I downloaded the link to the other lead screw is not working anymore, can you tell me what type are the other lead screws ?

Acme lead screw and nut http://store.makerstoolworks.com/motion/z-axis-lead-screw-an... .. this is the link that is not working anymore.

Thank you.

 

You are the best as usual!

 

Hi everyone! I'm sorry for my English ... I've got two leadscrews 10mm OD , 2.5 pitch, and 10 starts PBC linear. Price is incredible!! They come with anti - backlash nut . I already have them at home and are great !! I hope they can serve someone like me who had long been looking for !!! Greetings to all !! Go lautr3k !!

Leadscrew 10 start, 10 O.D. 2.5 pitch 20" length with anit-backlash nut

 

I think $ 130 for two leadscrews + nuts + US shipments to Spain with the same specifications as the screws of Trinitylabs not bad . In the Bom says that cost $ 100 each one. If you find something better than that price I 'd love you to put it over here .