Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

Designer Jeans with a Laser

Discussion in 'Laser Cutters' started by AK-Creation, Nov 1, 2015.

Designer Jeans with a Laser

Designer Jeans with a Laser

Discussion in 'Laser Cutters' started by AK-Creation, Nov 1, 2015.

I install the third extension on my cnc router and ask me, what can I do with a laser? So I make some test and find out - >>It is possible to engrave jeans clothes<<. Create your own Designer Jeans with a Laser!

laser jeans
Page 1 of 2
  1. AK-Creation

    AK-Creation Well-Known
    Builder

    Joined:
    Dec 2, 2013
    Messages:
    59
    Likes Received:
    77
    AK-Creation published a new build:

    Read more about this build...
     
    #1 AK-Creation, Nov 1, 2015
  2. Serge E.

    Serge E. Journeyman
    Builder

    Joined:
    May 6, 2014
    Messages:
    730
    Likes Received:
    252
    Fantastic ! Can't wait to try it ... not sure I have the right laser, but I do have some old pairs of jeans I can test on before the wife and daughter get wind of this 'trick' for myOX.
     
    #2 Serge E., Nov 3, 2015
    Joe Santarsiero likes this.
  3. AK-Creation

    AK-Creation Well-Known
    Builder

    Joined:
    Dec 2, 2013
    Messages:
    59
    Likes Received:
    77
    Good luck for your first tests!
     
    #3 AK-Creation, Nov 4, 2015
  4. Mohamed AEN

    Mohamed AEN New
    Builder

    Joined:
    Dec 10, 2015
    Messages:
    2
    Likes Received:
    0
    Great work..two questions: does the engraved pair of jeans suffer and weak texture problems after the engraving process? 2- Have you tried it on microfiber jerseys? If you create an adjustment table for different fabric this could be a nice patent
     
    #4 Mohamed AEN, Dec 10, 2015
  5. AK-Creation

    AK-Creation Well-Known
    Builder

    Joined:
    Dec 2, 2013
    Messages:
    59
    Likes Received:
    77
    Hello Mohamed,
    I have been engraved some jeans, but I find never "suffer and weak texture problems after the engraving process".

    Pic2.jpg


    The following picture shows a zoom photo from the jeans texture.

    Pic1.jpg


    At time, I made the engraving test only on jeans.


    A patent may only be registered if the invention is novel.
    Here are Youtube videos from a high end Laser solution.





    My solution is just one way for home users, to design/ engrave his own jeans.
     
    #5 AK-Creation, Dec 12, 2015
    Joe Santarsiero and Serge E. like this.
  6. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,894
    Likes Received:
    1,553
    Any suggestions on how to get a laser to scan like that? :)
     
    #6 Rick 2.0, Dec 12, 2015
  7. AK-Creation

    AK-Creation Well-Known
    Builder

    Joined:
    Dec 2, 2013
    Messages:
    59
    Likes Received:
    77
    Hi Rick,
    here a website of a possible laser, for engraving all kinds of things in few seconds.

    HOME - ACI Laser

     
    #7 AK-Creation, Dec 12, 2015
    Rick 2.0 likes this.
  8. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,894
    Likes Received:
    1,553
    Now if we can just figure out a DIY version....
     
    #8 Rick 2.0, Dec 12, 2015
  9. AK-Creation

    AK-Creation Well-Known
    Builder

    Joined:
    Dec 2, 2013
    Messages:
    59
    Likes Received:
    77
    Nice idea, I think it can be possible.
    The hardest part would be to find someone who programmed the software.
    But I'm not sure if that's appropriate for DIY. A strong Laser are very dangerous!

    Currently I have to do some projects and have no time to figure a DIY version.
     
    #9 AK-Creation, Dec 12, 2015
  10. Mohamed AEN

    Mohamed AEN New
    Builder

    Joined:
    Dec 10, 2015
    Messages:
    2
    Likes Received:
    0
    I have developed a stable version of cable wire system better than the one shown below in the video.


    Do you think it is a good idea to h ook a laser tube head in this design for commercial small business
     
    #10 Mohamed AEN, Dec 14, 2015
  11. AK-Creation

    AK-Creation Well-Known
    Builder

    Joined:
    Dec 2, 2013
    Messages:
    59
    Likes Received:
    77
    Hello Mohamed,
    it is very easy to upgrade a "Normal" 3D Printer to a Laser/ Print combination. The most 3D Printer have only a work area from 200x200mm (it is small for a Laser).

    I think a good basis for a small business is, when you create combi from a Laser and 3D Printhead. Both applications do not require a high expenditure of force and so you can use your "stable cable wire version".
    It is always better for the user to have one maschine for all kind of work.

    I like CNC Combo - Machines (3D Print, Laser, Mill .... what ever).
    I can change easy the tools on my machine:

    2015-10-18 19.24.15.jpg 2015-08-10 19.21.10.jpg 2015-07-30 17.02.31.jpg
     
    #11 AK-Creation, Dec 15, 2015
  12. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,017
    Likes Received:
    1,682
    That is a great build. I was thinking of making mine a combo machine that can do all three, as well.
     
    #12 Giarc, Dec 16, 2015
  13. AK-Creation

    AK-Creation Well-Known
    Builder

    Joined:
    Dec 2, 2013
    Messages:
    59
    Likes Received:
    77
    Why only three extensions?

    What is with a drag knife?

    2015-03-19 18.53.34.jpg 2015-03-19 18.55.15.jpg

    Or a hot wire (Styrofoam cut) ..... :)
     
    #13 AK-Creation, Dec 16, 2015
    Last edited: Dec 16, 2015
  14. amos ben amos

    amos ben amos New
    Builder

    Joined:
    Mar 9, 2014
    Messages:
    13
    Likes Received:
    0
    Ak-creation can you please share youre dreag knife file? it looks awesome
     
    #14 amos ben amos, Dec 16, 2015
    Last edited: Dec 16, 2015
  15. AK-Creation

    AK-Creation Well-Known
    Builder

    Joined:
    Dec 2, 2013
    Messages:
    59
    Likes Received:
    77
    Yes, I like to share the my Drag Knife with you. But the build is not finished yet, I have only my Test Results.
    I miss a Spring in the axis - for a constant pressure to cut.


    Drag Knife.JPG 2015-03-19 18.54.37.jpg 2015-03-19 18.55.32.jpg 2015-03-19 18.54.26.jpg

    I upload different "Plates", for different offset settings (the upper Holes have different position).
     

    Attached Files:

    #15 AK-Creation, Dec 16, 2015
    Jose A. Molina and Serge E. like this.
  16. AK-Creation

    AK-Creation Well-Known
    Builder

    Joined:
    Dec 2, 2013
    Messages:
    59
    Likes Received:
    77
    Hi Justin,
    all my builds are in progress and I need some time to finish these.
    It's still too early, to publish half-finished buildings - as well as the Drag Knife.
     
    #16 AK-Creation, Dec 16, 2015
  17. amos ben amos

    amos ben amos New
    Builder

    Joined:
    Mar 9, 2014
    Messages:
    13
    Likes Received:
    0
    Thank you my friend and I will definitely follow your to see how it's going and maybe try it myself soon :)
     
    #17 amos ben amos, Dec 16, 2015
  18. AK-Creation

    AK-Creation Well-Known
    Builder

    Joined:
    Dec 2, 2013
    Messages:
    59
    Likes Received:
    77
    You're right!
    At the Christmas holidays, I will try to take some time to write an posting about a reference sensor for the Z axis (Automatic leveling for all kinds of tools).
    This project is also in progress and not complete yet (I think the Sensor size can be smaller). Perhaps we can find an optimal solution together?

    The video shows the handling of the sensor.
     

    Attached Files:

    #18 AK-Creation, Dec 18, 2015
    Last edited: Dec 18, 2015
  19. mrarmyant

    mrarmyant New
    Builder

    Joined:
    May 31, 2016
    Messages:
    5
    Likes Received:
    0
    What Z is that?
     
    #19 mrarmyant, Oct 26, 2016
  20. AK-Creation

    AK-Creation Well-Known
    Builder

    Joined:
    Dec 2, 2013
    Messages:
    59
    Likes Received:
    77
    Hi mrarmyant,
    for the x and y Axis you set the zero point with a limit switch, but how can you get the zero position for the z Axis?
    You have different thickness of material to mill and when you change the tool, you have also a other z Axis positon.
    With the Sensor, you can define the zero position of the piece automaticly.

    Times flows fast! Last year, I would write a post about the Sensor, but I have forgot it! :blackeye:
     
    #20 AK-Creation, Oct 27, 2016
  21. Jose A. Molina

    Jose A. Molina Well-Known
    Builder

    Joined:
    Mar 7, 2016
    Messages:
    62
    Likes Received:
    61
    So Cool! The drag knife makes me wonder if a tool head with markers can be used to make complex t-shirt designs. im thinking something like a gatling gun where the marker colors are all in the head and the chosen color pops down to engage the material.
     
    #21 Jose A. Molina, Oct 28, 2016
    Serge E. likes this.
  22. AK-Creation

    AK-Creation Well-Known
    Builder

    Joined:
    Dec 2, 2013
    Messages:
    59
    Likes Received:
    77
    Let your ideas become reality!
     
    #22 AK-Creation, Oct 28, 2016
  23. mrarmyant

    mrarmyant New
    Builder

    Joined:
    May 31, 2016
    Messages:
    5
    Likes Received:
    0
    I meant where are plans for the Z axis? any photos of the back side?
     
    #23 mrarmyant, Dec 7, 2016
  24. AK-Creation

    AK-Creation Well-Known
    Builder

    Joined:
    Dec 2, 2013
    Messages:
    59
    Likes Received:
    77
    Hi mrarmyant,
    here some photos from the Z - Axe.

    2016-12-08 16.36.31.jpg 2016-12-08 16.36.44.jpg 2016-12-08 16.37.11.jpg 2016-12-08 16.37.43.jpg
     
    #24 AK-Creation, Dec 8, 2016
  25. lunknowl

    lunknowl New
    Builder

    Joined:
    Oct 26, 2016
    Messages:
    16
    Likes Received:
    1
    hi, what 3d printer are you using?
     
    #25 lunknowl, Dec 11, 2016
  26. AK-Creation

    AK-Creation Well-Known
    Builder

    Joined:
    Dec 2, 2013
    Messages:
    59
    Likes Received:
    77
    Hi lunknowl,
    in the past I use my DIY 3D Printer "Big Size" (I have sell it last week).
    Link: 3D Printer - Big Size

    For now, I use my Combo Maschine to produce my 3D parts.
    See pictures above.
     
    #26 AK-Creation, Dec 11, 2016
  27. Becky Groover

    Becky Groover New
    Builder

    Joined:
    Dec 11, 2017
    Messages:
    2
    Likes Received:
    0
    Wow. I like designer jeans. Do you have more videos on how designer jeans are made? Thanks :)
     
    #27 Becky Groover, Dec 11, 2017
  28. AK-Creation

    AK-Creation Well-Known
    Builder

    Joined:
    Dec 2, 2013
    Messages:
    59
    Likes Received:
    77
    Hello Becky,
    yes, I have another video how it works to engrave a flower on a jeans. :)

    20151226_131355.mp4

    20151226_142133.jpg 2015-12-26 14.22.09.jpg
     

    Attached Files:

    #28 AK-Creation, Dec 11, 2017
  29. Becky Groover

    Becky Groover New
    Builder

    Joined:
    Dec 11, 2017
    Messages:
    2
    Likes Received:
    0
    Wow. that's nice. Actually, I work in paraval.us, I am also clothing designer, But I am just starter, I am looking to learn more about this indstury. Thanks for these videos Ak-Creation
     
    #29 Becky Groover, Dec 16, 2017
  30. Scotty Orr

    Scotty Orr Journeyman
    Builder

    Joined:
    May 21, 2015
    Messages:
    315
    Likes Received:
    178
    AK, I see you used about 10% power with your 2.8W laser. I have a 2.3W so I am thinking 15% would be about equivalent. I am curious if you ever tried higher power, but used a faster feed rate (and what results you had)? The design I am thinking about will take "forever" at 350mm/min, so I am considering a higher power (say 30-40%) but increasing the feed rate. What problems might I run into?
     
    #30 Scotty Orr, Dec 20, 2017
Page 1 of 2

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice