Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

UltiFaker 2 Go

Discussion in '3D printers' started by PaulS, Feb 15, 2016.

UltiFaker 2 Go

UltiFaker 2 Go

Discussion in '3D printers' started by PaulS, Feb 15, 2016.

This is a breakdown of how I designed the UltiFaker 2 Go as well as how I machined and assembled it. I'll include a complete BOM and all of the drawings and prices.

UltiMaker 2 Go UltiFaker Clone Cartesian Ultimaker
  1. PaulS

    PaulS New
    Builder

    Joined:
    Jul 7, 2015
    Messages:
    7
    Likes Received:
    21
    PaulS published a new build:

    Read more about this build...
     
    #1 PaulS, Feb 15, 2016
  2. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,892
    Likes Received:
    1,551
    Looks like a good start. Can't wait to see how you fit the mechanics into the finished project.

    You mention Dibond being expensive but if you shop around, its really not that bad. A pack of 10 12x18 panels is only $55 on ebay or 24x48 panels on Amazon for $30. It might be interesting to start with a larger sheet and do a folded design of this project.
     
    #2 Rick 2.0, Feb 16, 2016
  3. PaulS

    PaulS New
    Builder

    Joined:
    Jul 7, 2015
    Messages:
    7
    Likes Received:
    21
    Thanks for the input Rick. I did come across some of these links but those are actually 1/8" thick panels. I needed the 1/4" which for whatever reason is either way more expensive or harder to come by. Usually the stuff I came across in 1/4" thickness came in the 4 ft x 8 ft sheets and I just didn't want to manage transporting or cutting something that big. However, I really like your score and fold idea.
     
    #3 PaulS, Feb 16, 2016
  4. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,892
    Likes Received:
    1,551
    I keep a standing search for Alucobest panels on Ebay to have them email me as soon as any pop up. A little over a year ago I scored seven of the silver 16 x 50 x 1/4 panels for $16 apiece (shipped). 80/20 puts their off-cuts out periodically and they generally don't last long.
     
    #4 Rick 2.0, Feb 16, 2016
  5. PaulS

    PaulS New
    Builder

    Joined:
    Jul 7, 2015
    Messages:
    7
    Likes Received:
    21
    I'll keep my eyes peeled. Thanks for the info!
     
    #5 PaulS, Feb 16, 2016
    Thomas Hårklau likes this.
  6. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,758
    Likes Received:
    2,441
    Excellent build @PaulS you have done a great job at keeping cost down with what looks like it will be a great printer!
    Keep up the good work and thank you for sharing
     
    #6 Mark Carew, Feb 20, 2016
  7. sjhilton

    sjhilton New
    Builder

    Joined:
    Dec 12, 2014
    Messages:
    6
    Likes Received:
    1
    Thanks Paul. I am very interested in your build and will be watching.
     
    #7 sjhilton, Mar 13, 2016
  8. Binary

    Binary New
    Builder

    Joined:
    Apr 15, 2016
    Messages:
    1
    Likes Received:
    0
    Double check the units on your chip load. I am assuming you are using a 3 flute (cutting blades).

    Feed Rate = Chip Load x RPM x Flutes

    .001 in x 16000 RPM x 3 = 48 in/min = 4 feet/min
     
    #8 Binary, Apr 15, 2016
  9. PaulS

    PaulS New
    Builder

    Joined:
    Jul 7, 2015
    Messages:
    7
    Likes Received:
    21
    Thanks for catching that. I meant in/min
     
    #9 PaulS, Apr 20, 2016
  10. chris kelly

    chris kelly New
    Builder

    Joined:
    Mar 24, 2015
    Messages:
    4
    Likes Received:
    0
    I printed the top of the extruder and got 36mm is this correct?
     

    Attached Files:

    #10 chris kelly, Jul 5, 2016

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice