Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

CNC Rotary Table Rotational Axis, A Axis B Axis 4th 5th Axis CNC Dividing Head

Discussion in 'CNC Mills/Routers' started by cureac, Mar 4, 2016.

CNC Rotary Table Rotational Axis, A Axis B Axis 4th 5th Axis CNC Dividing Head

CNC Rotary Table Rotational Axis, A Axis B Axis 4th 5th Axis CNC Dividing Head

Discussion in 'CNC Mills/Routers' started by cureac, Mar 4, 2016.

This is my first major project.

Rotational A axis and B for cnc
  1. cureac

    cureac New
    Builder

    Joined:
    Mar 1, 2014
    Messages:
    18
    Likes Received:
    28
    #1 cureac, Mar 4, 2016
    Quas7 and GrayUK like this.
  2. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    Come on Cureac, you know what I'm going to ask! :)
    Looks really interesting. I can't wait for more info. :rolleyes:
    Gray
     
    #2 GrayUK, Mar 5, 2016
  3. cureac

    cureac New
    Builder

    Joined:
    Mar 1, 2014
    Messages:
    18
    Likes Received:
    28
    Because I had a longer belt and because that height would have been too high.
     
    #3 cureac, Mar 5, 2016
  4. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    Can you show us how it will be used with the C Beam machine, and perhaps in action? :rolleyes:
    Cheers
    Gray
     
    #4 GrayUK, Mar 6, 2016
  5. Florian Bauereisen

    Florian Bauereisen Well-Known
    Builder

    Joined:
    Feb 24, 2014
    Messages:
    188
    Likes Received:
    60
    What i am really curious about:
    Which cam out there is 5 axis and affordalbe?

    Flo
     
    #5 Florian Bauereisen, Mar 6, 2016
  6. David the swarfer

    David the swarfer OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Aug 6, 2013
    Messages:
    3,460
    Likes Received:
    1,915
    well now, SketchUcam is very affordable (free) and can control A,B and C, though not for continuous 5 axis motion.
    however, for each gcode file you generate you can set the A B and C and they will go to the set positions before cutting starts, and back to 0 at the end of the file.
    this makes it possible to machine 5 faces of something held in that chuck using standard SketchUcam techniques and the Gcode joiner.

    so, I think Fusion360 might do 5 axis (also free for some uses) and there may be others, but 5 axis geometry is complicated, so you will probably have to pay for it.
     
    #6 David the swarfer, Mar 6, 2016
    Serge E. and Tom Allen like this.
  7. cureac

    cureac New
    Builder

    Joined:
    Mar 1, 2014
    Messages:
    18
    Likes Received:
    28
    #7 cureac, Mar 6, 2016
  8. Lee Whiteley

    Lee Whiteley New
    Builder

    Joined:
    Sep 14, 2014
    Messages:
    23
    Likes Received:
    3
    Hello,

    I'm very interested in what your working on and would also like to build one for myself. My needs are a fourth axis so not nearly as sophisticated as working with an additional axis.

    Would you perhaps add some additional pictures and of course any comments on your progress.

    Thanks,

    Lee
     
    #8 Lee Whiteley, Mar 14, 2016
  9. Serge E.

    Serge E. Journeyman
    Builder

    Joined:
    May 6, 2014
    Messages:
    730
    Likes Received:
    252
    There is a hobbyist version DeskProto "true multi 5 axis" CAM software for about $350 (US, instead of ... 1000$ to get the right to use in a commercial maner). I bumped into it over at MakeCNC as I was looking for something ... Deskproto True multi 5 Axis CAM software
     
    #9 Serge E., Mar 14, 2016
  10. Florian Bauereisen

    Florian Bauereisen Well-Known
    Builder

    Joined:
    Feb 24, 2014
    Messages:
    188
    Likes Received:
    60
    Hi,
    thanks for the info.

    Flo
     
    #10 Florian Bauereisen, Mar 14, 2016
  11. Chrisko90

    Chrisko90 New
    Builder

    Joined:
    Mar 12, 2014
    Messages:
    4
    Likes Received:
    0
    Hello cureac,
    very cool build!
    With which firmware you control the 5 axis?
    According to my knowledge, GRBL can only control 3 axes and the marlin firmware is for cnc operation not as good.

    I am looking forward to your answer!

    Chris
     
    #11 Chrisko90, Jan 4, 2017
  12. cureac

    cureac New
    Builder

    Joined:
    Mar 1, 2014
    Messages:
    18
    Likes Received:
    28
    #12 cureac, Jan 5, 2017
  13. cureac

    cureac New
    Builder

    Joined:
    Mar 1, 2014
    Messages:
    18
    Likes Received:
    28
    In fact the cnc usb controller mk3 9 axis from planet cnc have a proprietary software for cutting, milling etc

    Description ( from planet cnc)
    CNC USB controller offers wide variety of output and input signal functions, that meets the demand of the most complex DIY router or CNC milling machine. There are also some features like automatic tool length measure, automatic tool change, camera offset measure that speed up setup process of machining.
     
    #13 cureac, Jan 5, 2017
  14. Chrisko90

    Chrisko90 New
    Builder

    Joined:
    Mar 12, 2014
    Messages:
    4
    Likes Received:
    0
    Hello cureac,

    thank you for this nice information!
    I will try to set up my own machine with that controller!
    This sounds very professional and comes with lot of features in one program!

    Do you have more pictures or information of your machine and your A/B Table?
     
    #14 Chrisko90, Jan 9, 2017

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice