Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

C-Beam Big Mouth

Discussion in 'CNC Mills/Routers' started by Richard Gouge, Jun 26, 2016.

C-Beam Big Mouth

C-Beam Big Mouth

Discussion in 'CNC Mills/Routers' started by Richard Gouge, Jun 26, 2016.

My first build was with the basic C-Beam Build. I soon found the z clearance a little constricting So I added 2 500 mm actuators to support the x axis rail . I also left off the front and back y axis support rails for easy cleaning. I mounted the base of the machine to 1/2" mdf with 10/32 screws and blind nuts.

C-Beam xPro V2 nema 23
  1. Richard Gouge

    Richard Gouge New
    Builder

    Joined:
    May 14, 2016
    Messages:
    2
    Likes Received:
    8
    #1 Richard Gouge, Jun 26, 2016
    David the swarfer likes this.
  2. Richard Gouge

    Richard Gouge New
    Builder

    Joined:
    May 14, 2016
    Messages:
    2
    Likes Received:
    8
    Testing using Grbl Panel and a program for a part i previously made. I tested the z axis travel with a level mounted on the x axis beam to see if it would maintain it's level.
    I'm very surprised and pleased to say it works as I had hoped.
     
    #2 Richard Gouge, Jun 26, 2016
  3. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,758
    Likes Received:
    2,441
    I like the open front and back look, nice Build :thumbsup:
     
    #3 Mark Carew, Jun 27, 2016
  4. Sonny Lowe

    Sonny Lowe Journeyman
    Staff Member Builder Resident Builder

    Joined:
    Nov 11, 2015
    Messages:
    143
    Likes Received:
    158
    Richard,

    I love this idea, it has crossed my mind more than once lately. I've wanted to do something similar and look forward to seeing your results as you progress with the build.

    I think having the X and Z movements on their own respective gantries will prove to provide a much more stable spindle, and hopefully relieve some of the spindle variation issues I've read about!?!?

    Keep up the great work...it's very exciting :)

    Sonny
     
    #4 Sonny Lowe, Jun 27, 2016
  5. Bob K

    Bob K New
    Builder

    Joined:
    Jun 2, 2016
    Messages:
    55
    Likes Received:
    20
    Richard - you've got one of the few CNC builds that use multiple steppers on one axis. How did you drive them?

    What firmware did you use? I'd like a copy if you don't mind.

    I'm just starting to get GRBL running on my 2650 based controller. So far it compiles & uploads but I can't communicate with it over the USB port.

    Bob
     
    #5 Bob K, Jul 28, 2016
  6. Bad Sequel

    Bad Sequel Well-Known
    Builder

    Joined:
    Aug 19, 2015
    Messages:
    83
    Likes Received:
    32
    Please add some more pictures!
     
    #6 Bad Sequel, Jul 28, 2016
    Rick 2.0 likes this.
  7. David the swarfer

    David the swarfer OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Aug 6, 2013
    Messages:
    3,462
    Likes Received:
    1,915
    Hi
    Remember to communicate at 115200 baud, GRBL 0.8 defaulted to 9600, but 0.9 is 115200 so you have to tell your GUI program to use that speed.
     
    #7 David the swarfer, Jul 29, 2016
  8. dean knipping

    dean knipping New
    Builder

    Joined:
    Mar 24, 2015
    Messages:
    84
    Likes Received:
    16
    do you think there is going to be a deflection issue with the gantry so tall? I didn't see any cross bracing on the uprights and would think there could be a lot of twist when cutting on the X axis, especially if you were cutting up near the top of your limits. I R a shirt cuff engineer (i.e. it LOOKS like it should work) so I could be totally wrong ;)
     
    #8 dean knipping, Jul 29, 2016
  9. pappydan

    pappydan Well-Known
    Builder

    Joined:
    Jul 29, 2016
    Messages:
    46
    Likes Received:
    26
    I had the same problem with the stock C Beam machine. I was going to try something else until I saw your build. You probably saved me a lot of time and trouble. I have the same goal to use a vice and/or build a table with slots to clamp material/jigs to. Now if I can get the second axis slaved to Z I should be good to go.
     
    #9 pappydan, Aug 29, 2016

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice