Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

Plasma cutting table

Discussion in 'Laser Cutters' started by mytechno3d, Jun 9, 2016.

Plasma cutting table

Plasma cutting table

Discussion in 'Laser Cutters' started by mytechno3d, Jun 9, 2016.

This is our plasma cutting table , based on the famous OX CNC . Can cut up to 15 mm ( steel , stainless , aluminium ) with a really good accuracy and at a really high speed .

plasma cutting table vslot europe cnc OX CNC
Tags:
Page 2 of 3
  1. petere101

    petere101 New
    Builder

    Joined:
    Jun 20, 2016
    Messages:
    15
    Likes Received:
    1
    THC stands for Torch Height Control. It's a method to optimise the height of the plasma arc above the work piece. In the extreme, it can be used to (for example) cut a piece of corrugated iron....
     
    #31 petere101, Sep 6, 2016
    gwandad likes this.
  2. Redneck darrell

    Redneck darrell New
    Builder

    Joined:
    Jun 30, 2016
    Messages:
    13
    Likes Received:
    0
    Ok that makes sense , now I just need to figure out how to wire the torch ( powermax 30 ) to the cnc.
     
    #32 Redneck darrell, Sep 7, 2016
  3. petere101

    petere101 New
    Builder

    Joined:
    Jun 20, 2016
    Messages:
    15
    Likes Received:
    1
    OK, Plasma enthusiasts!
    What size machine do you have and what is your best result in (1) Aluminium, (2) Mild Steel, and, (3) Stainless Steel. Please provide images of cut and dross :) AND plasma machine info and cutting settings. This should be interesting!
     
    #33 petere101, Sep 8, 2016
  4. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    109
    Likes Received:
    314
    My best result is in Mild Steel 3 mm , speed 2500mm/mn , arc voltage 125V , torch height 1.2mm
    [​IMG] [​IMG]

    also good in mild steel 5mm at 1400mm/mn

    [​IMG]

    Plasma cutter in an Hypertherm PowerMax 45.

    I'm still searching good setup to cut aluminium .
     
    #34 mytechno3d, Sep 9, 2016
    Mark Carew likes this.
  5. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    109
    Likes Received:
    314
    this face has no treatment ( except it's painted ) , there were some dross on the other side , but really easy to clean.
     
    #35 mytechno3d, Sep 11, 2016
  6. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    109
    Likes Received:
    314
    some of my works done with this cutting table
    op1.jpg op2.jpg op3.jpg op4.jpg op5.jpg
     
    #36 mytechno3d, Sep 20, 2016
    Giarc and Evan F like this.
  7. Svetko Buha

    Svetko Buha New
    Builder

    Joined:
    Sep 16, 2016
    Messages:
    8
    Likes Received:
    0
    Ciao
    E 'possibile acquistare The laser Box ( laser 2.8W) già montate o di progetto per la sua preparazione per uso hobbisti.
    Buha
     
    #37 Svetko Buha, Sep 20, 2016
  8. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    109
    Likes Received:
    314
    Hello
    Yes it is possible , i will contact you on PM
     
    #38 mytechno3d, Sep 21, 2016
  9. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    109
    Likes Received:
    314
    My CNC plasma cutting table is now working with a THC , it is a pretty nice addon , but really usefull only on big size cutting .
     
    #39 mytechno3d, Jan 22, 2017
    Mark Carew likes this.
  10. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    109
    Likes Received:
    314
    z floting head.jpg IMG_20170308_182605.jpg IMG_20170308_182551.jpg IMG_20170308_182524.jpg IMG_20170308_182538.jpg For those who asked me some pictures of the Floating Head
     
    #40 mytechno3d, Mar 8, 2017
    polemidis and Kyo like this.
  11. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,758
    Likes Received:
    2,440
    #41 Mark Carew, Mar 8, 2017
  12. EfrainLenisMaturano

    EfrainLenisMaturano New
    Builder

    Joined:
    Mar 8, 2017
    Messages:
    9
    Likes Received:
    0
    hi, can you send the wiring diagram please? thanls
     
    #42 EfrainLenisMaturano, Mar 26, 2017
  13. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    109
    Likes Received:
    314
    Hello
    For which part do you need the wiring diagram ?
    For all the movements, it is identical to the OX CNC , for the wiring of theTHC , you can find the wiring on this thread some post before .
     
    #43 mytechno3d, Mar 27, 2017
  14. EfrainLenisMaturano

    EfrainLenisMaturano New
    Builder

    Joined:
    Mar 8, 2017
    Messages:
    9
    Likes Received:
    0
    Ok thank you
     
    #44 EfrainLenisMaturano, Mar 27, 2017
  15. trivalb

    trivalb New
    Builder

    Joined:
    Dec 29, 2015
    Messages:
    3
    Likes Received:
    4
    Hi, I already have an OX derived router diy.. I'm wondering. Are delrin wheel ok for a plasma cutter? No troubles whith high temperature of iron small pieces from the spot ? Sorry for the poor english.
     
    #45 trivalb, Oct 14, 2017
  16. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    109
    Likes Received:
    314
    Hello
    I use delrin v wheels from around a year , and i have no problem with them.
    They are pretty resistant .. :)
     
    #46 mytechno3d, Oct 14, 2017
    trivalb likes this.
  17. JustinTime

    JustinTime Veteran
    Builder

    Joined:
    Dec 18, 2013
    Messages:
    784
    Likes Received:
    259
    A few days ago on another thread someone mentioned that he had problem with the delrin wheels. They got a flat spot when he left his machine idle overnight. I think his gantry was a bit heavy, which makes it more prone to getting a flat spot.
     
    #47 JustinTime, Oct 14, 2017
  18. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    109
    Likes Received:
    314
    it can happed when your eccentric spacer is over tight
     
    #48 mytechno3d, Oct 14, 2017
  19. Redneck darrell

    Redneck darrell New
    Builder

    Joined:
    Jun 30, 2016
    Messages:
    13
    Likes Received:
    0
    What program do you use to do the cutting with? All I can find in open source is laser programs nothing with a lead in or lead out.
     
    #49 Redneck darrell, Oct 14, 2017
  20. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    109
    Likes Received:
    314
    I do not use an opensource program with this machine .
    I use sheetcam to generate my gcode file , and you can use grbl software to control it like a cnc ( with a torch instead router )
     
    #50 mytechno3d, Oct 16, 2017
  21. Tinkerman92

    Tinkerman92 New
    Builder

    Joined:
    Oct 19, 2017
    Messages:
    7
    Likes Received:
    3
    @mytechno3d I'm thinking about doing a build very similar to this minus the water table for now.

    I have 3 questions

    1. Do you feel the 20x80 rails are necessary without a water table or could 20x40 rails be used instead

    2. What size belt and pull are you using

    3. What size motors
     
    #51 Tinkerman92, Oct 26, 2017
  22. Redneck darrell

    Redneck darrell New
    Builder

    Joined:
    Jun 30, 2016
    Messages:
    13
    Likes Received:
    0
    I just tried sheet cam out well worth buying just one question im using ardunio grbl what post processor do you use
     
    #52 Redneck darrell, Oct 26, 2017
  23. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    109
    Likes Received:
    314
    **************
    Hello
    Sorry to answer you only now , to much work to do and not enough time ...
    1 / because au the size of the machine i prefer using 20x80 instead 20x40 rails , plasma cutting go really fast , and you must have the maximum rigidity .
    2 / I'm using GT3 belt and GT3 pulley ( same as ox CNC )
    3 / I use nema 23 for x and y axis and nema 17 for 7 axis
     
    #53 mytechno3d, Jun 14, 2018
  24. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    109
    Likes Received:
    314
    Hello
    I 'm using a mach3 compatible card now , but when i was using GRBL , from memory i also use mach3 post processor , but as i said , it is from memory ..
     
    #54 mytechno3d, Jun 14, 2018
  25. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    109
    Likes Received:
    314
    It's been 2 years now that I use this machine , no problem at all :) .
    My only advice is not to invest in THC for this size on cutting table ( on only use 3 or 4 times in 2 years )
     
    #55 mytechno3d, Aug 22, 2018
  26. John Mayer

    John Mayer New
    Builder

    Joined:
    Aug 17, 2018
    Messages:
    24
    Likes Received:
    8
    Can you please provide the BOM?
     
    #56 John Mayer, Aug 25, 2018
  27. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    109
    Likes Received:
    314
    Hello , i will try to post the BOM tomorrow afternoon
     
    #57 mytechno3d, Aug 26, 2018
  28. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    109
    Likes Received:
    314
    BOM is now published , some parts are missing but will be added really soon .
     
    #58 mytechno3d, Sep 3, 2018
    John Mayer likes this.
  29. John Mayer

    John Mayer New
    Builder

    Joined:
    Aug 17, 2018
    Messages:
    24
    Likes Received:
    8
    Thanks! Looking forward the completed version!
     
    #59 John Mayer, Sep 8, 2018
  30. toomanyquail

    toomanyquail New
    Builder

    Joined:
    Sep 7, 2018
    Messages:
    2
    Likes Received:
    0
    I would also love to see the completed BOM. This machine looks great. What is the fastest feed rate you feel comfortable with on the machine (not worrying about plate thickness)? Thanks!!
     
    #60 toomanyquail, Sep 12, 2018
Page 2 of 3

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice