Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

Routy GT2 290 BSX CNC Router, Low Cost and Good!

Discussion in 'CNC Mills/Routers' started by Ronald van Arkel, Aug 4, 2015.

Routy GT2 290 BSX CNC Router, Low Cost and Good!

Routy GT2 290 BSX CNC Router, Low Cost and Good!

Discussion in 'CNC Mills/Routers' started by Ronald van Arkel, Aug 4, 2015.

The Routy GT2 300 BSX CNC Router is a Low Cost CNC build. It performs the same as the larger Routy's from OpenBuilds but doesn't break the bank!

Routy CNC Router OpenBuilds Mexico Low Cost
Page 5 of 5
  1. ensari cokur

    ensari cokur New
    Builder

    Joined:
    May 5, 2016
    Messages:
    29
    Likes Received:
    6
    Thank you very much. I will be looking forward to hear from you.
     
    #121 ensari cokur, Sep 20, 2016
  2. gianmarko

    gianmarko New
    Builder

    Joined:
    Aug 15, 2016
    Messages:
    3
    Likes Received:
    0
    thanks everybody for the answers
    i will probably settle for the 660, as i want to keep this simple and light, but im interested in the c-beam mod.

    once i get familiar with building these machines ill go for something larger, stronger, and capable of cutting alu, and then maybe conver my vertical mill to CNC, but thats for another day/month/year :D
     
    #122 gianmarko, Sep 20, 2016
  3. Ronald van Arkel

    Ronald van Arkel Veteran
    Staff Member Builder Resident Builder

    Joined:
    May 7, 2014
    Messages:
    472
    Likes Received:
    245
    I've listed the 20x20 1mm shorter, the gantry 20x60 is 443mm, my bad. The 20x20 can be 443mm as well.

    The DW660 and DW611 use different clamps. the link I gave you can be mounted directly to the 20x40 V-Slot but the DW611 base from OpenBuilds needs extra hardware to fit the router. You could start with the metal straps and cast corner brackets first, and later on you can make your own base, this is what I recommend.

    We at OpenBuilds Mexico use a miter saw with a non-ferrous blade, and due to lack of better we use WD40 to lubricate when cutting.

    The Weight of the DW660 is 3.2lbs/ 1.45kg, I believe this includes the cable and standoff (this you will not use).

    -Ronald
     
    #123 Ronald van Arkel, Sep 20, 2016
  4. Ronald van Arkel

    Ronald van Arkel Veteran
    Staff Member Builder Resident Builder

    Joined:
    May 7, 2014
    Messages:
    472
    Likes Received:
    245
    I'm working on a test build, take a look at this: OpenBuilds Promoveo Study Builds

    It will have the base for the DW660 with some parts removed, the base looks like this but it will need a small mod to fit the 20x40 Z axis:

    DW660_test25.jpg

    If only I had more time...


    -Ronald
     
    #124 Ronald van Arkel, Sep 20, 2016
  5. Ronald van Arkel

    Ronald van Arkel Veteran
    Staff Member Builder Resident Builder

    Joined:
    May 7, 2014
    Messages:
    472
    Likes Received:
    245
    ZipToolTPGrinder.jpg

    Not my photo but you get the idea ;)
     
    #125 Ronald van Arkel, Sep 20, 2016
    GrayUK likes this.
  6. ensari cokur

    ensari cokur New
    Builder

    Joined:
    May 5, 2016
    Messages:
    29
    Likes Received:
    6
    Funny
     
    #126 ensari cokur, Sep 20, 2016
  7. nexhex

    nexhex New
    Builder

    Joined:
    Feb 22, 2017
    Messages:
    1
    Likes Received:
    0
    Hello All,

    I was looking for the build manual for the Routy, but it's not under the Files and Drawing tab.

    Have I overlooked something or has it been removed?

    Or would anyone recommend a similar build?

    Regards,
    Todd
     
    #127 nexhex, Feb 24, 2017
  8. Ronald van Arkel

    Ronald van Arkel Veteran
    Staff Member Builder Resident Builder

    Joined:
    May 7, 2014
    Messages:
    472
    Likes Received:
    245
    Hello Todd,

    Sorry to say that the files were removed as to new forum rules (no self promotion); this was an OpenBuilds Mexico SA de CV project and not from OpenBuildspartstore.com. Please, take a look at this topic/project: ROUTY CNC Router (V-Slot Belt & Pinion) .

    -Ronald
     
    #128 Ronald van Arkel, Feb 24, 2017
  9. Fernando F. Briones

    Fernando F. Briones New
    Builder

    Joined:
    Feb 28, 2017
    Messages:
    1
    Likes Received:
    0
    Buenos días comunidad Openbuils, Adquirí una maquina y aun no se que programas instalar para poder trabajar, trabajo en Autocad pero no se que programas utilizar para generar los códigos y como hacer para que mi maquina los reconozca.

    Gracias!!!
     
    #129 Fernando F. Briones, Feb 28, 2017
Page 5 of 5

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice