Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

Ultimo

Discussion in 'Other Builds' started by Brian Slee, Apr 27, 2014.

Ultimo

Ultimo

Discussion in 'Other Builds' started by Brian Slee, Apr 27, 2014.

Ultimo is the ultimate multi tool for the person who's serious about prototyping new ideas. A Delta Robot frame supports 3d printing up to 450mm in diameter, a powerful CNC Mill, and 50 amp plasma cutter for processing steel plate. And that's just a start.....wait till you see some of the other attachments we are currently working on incorporating.

Delta CNC 3d Plasma cutter mill drill
Page 2 of 7
  1. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,758
    Likes Received:
    2,441
    Nice! love watching this build and the progress your making. Keep up the good work :thumbsup:
     
    #31 Mark Carew, May 18, 2014
  2. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    Looking forward to the pictures Brian (including Boo, of course). :thumbsup:

    Tweakie.
     
    #32 Tweakie, May 18, 2014
  3. Brian Slee

    Brian Slee Well-Known
    Builder

    Joined:
    Apr 26, 2014
    Messages:
    191
    Likes Received:
    59
    Hey Folks,
    Been a good day today. I managed to get the rest of the V-slot installed and got my alignment caps all built for setting my studs after the concrete pour. And...I stuck a set of motor and electronics up on top just to get a sneak peak. As always Boo was right there to help....

    Stay Tuned...
     

    Attached Files:

    #33 Brian Slee, May 19, 2014
    Mark Carew likes this.
  4. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,758
    Likes Received:
    2,441
    Looking strong! :)
     
    #34 Mark Carew, May 19, 2014
  5. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    Coming along nicely Brian :thumbsup:

    Tweakie.
     
    #35 Tweakie, May 20, 2014
  6. Brian Slee

    Brian Slee Well-Known
    Builder

    Joined:
    Apr 26, 2014
    Messages:
    191
    Likes Received:
    59
    Thanks guys and gals,
    I am adding some braces in between the bottom plates to make sure I don't get any sag when I pour the slab. of course Boo is right there with his QA stamp at the ready :)
     

    Attached Files:

    #36 Brian Slee, May 20, 2014
  7. John R

    John R New
    Builder

    Joined:
    Apr 28, 2014
    Messages:
    13
    Likes Received:
    2
    LOL - pour slab! ;-) Neat! How hard/critical was it to align the V-Slots with each other? Boo sure looks like a good apprentice!!
     
    #37 John R, May 20, 2014
  8. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    Hi John,

    I am not certain but I think Boo is actually the boss. :D

    Tweakie.
     
    #38 Tweakie, May 20, 2014
    John R likes this.
  9. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,758
    Likes Received:
    2,441
    I thought Boo was the supervisor, the way he is watching over the job :D
     
    #39 Mark Carew, May 20, 2014
    John R likes this.
  10. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    You could be right Mark - Brian says that Boo is in charge of security but I suspect he is higher ranking than that. :D

    Tweakie.
     
    #40 Tweakie, May 20, 2014
    Mark Carew likes this.
  11. Brian Slee

    Brian Slee Well-Known
    Builder

    Joined:
    Apr 26, 2014
    Messages:
    191
    Likes Received:
    59
    Hi John,

    Yeppirs...Pour the slab...someone told me that I couldn't get the job done if it wasn't really stiff... ;)

    I wish I could say it was a completely original idea, but, it used to be common practice back in WWII to make large industrial lathes out of concrete because of metal shortages. Of course the concrete back then was not as good as the mixes they have today so the technique could only be used for large machines. I am confident that the new fiber reinforced concrete will be up to the task though even with only a 2" depth.

    The V-slot alignment is absolutely critical...Especially given the size of the bot and the precision we are looking to get out of it. Any errors in the alignment angle will be greatly magnified towards the perimeter of the circle resulting in large errors for X-Y position. I am only doing the dry fit ATM so nothing is set in stone (yet). When I get ready to pour the concrete I will probably use a jig attached to the V-slot to make sure all my angles are nuts on.
     
    #41 Brian Slee, May 20, 2014
    Last edited: May 20, 2014
  12. Brian Slee

    Brian Slee Well-Known
    Builder

    Joined:
    Apr 26, 2014
    Messages:
    191
    Likes Received:
    59
    Rut Ro Raggy...I think everyone has figured out that Boo is the real talent in the shop o_O
     
    #42 Brian Slee, May 20, 2014
    Mark Carew likes this.
  13. Brian Slee

    Brian Slee Well-Known
    Builder

    Joined:
    Apr 26, 2014
    Messages:
    191
    Likes Received:
    59
    Hi All,
    I wish I could report some forward progress today but it was two steps back instead. When I ordered my power supplies back in the first week of April I received one of the three with severe shipping damage. I immediately called the supplier CCTV out of china and they shipped out a new one right away. Unfortunately the new one came in DOA. I sent them another message and they won't even respond. I had to take today to escalate the issue to the company that processed the order. So now I will have to find a new supplier for the 48vdc supply that I am short grrrrrrrr....... :banghead:

    Stay Tuned...
     

    Attached Files:

    #43 Brian Slee, May 21, 2014
    Last edited: May 21, 2014
  14. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    Sorry to hear that Brian - hope you get it resolved without too much delay to your project build.

    (Much of the cheap stuff from China is manufactured / assembled without any form of quality control and is often (if not always) sent out without testing. This is perhaps one of the factors that makes it cheap. Some say that overall you should allow for a 20% reject rate when costing Chinese imported goods - still makes it cheap though). :)

    Tweakie.
     
    #44 Tweakie, May 22, 2014
  15. Brian Slee

    Brian Slee Well-Known
    Builder

    Joined:
    Apr 26, 2014
    Messages:
    191
    Likes Received:
    59
    Good Morning Tweakie,
    I tend to be very easy going. I think Mark can vouch for that. I would have still been happy if they had just sent me what I ordered in good working condition. What really upset me was when they quit talking to me after they took my money and left me with junk that didn't work.
     
    #45 Brian Slee, May 22, 2014
    Mark Carew likes this.
  16. Brian Slee

    Brian Slee Well-Known
    Builder

    Joined:
    Apr 26, 2014
    Messages:
    191
    Likes Received:
    59
    Hi All,
    Well I got the bracing between the bottom panels done today. After I put the last screw in it Boo said "Why don't you jump up and down on it just to be sure!"...So I did. No flex no bend no problem :p

    If I can get the top panel all laid out and cut tomorrow I will almost be back on schedule.

    Stay Tuned...
     

    Attached Files:

    #46 Brian Slee, May 22, 2014
    Last edited: May 22, 2014
  17. Brian Slee

    Brian Slee Well-Known
    Builder

    Joined:
    Apr 26, 2014
    Messages:
    191
    Likes Received:
    59
    Good Morning Gang,
    I have the top piece cut and ready for laying out the electronics and the motors. Not too bad for a hand cut on the band saw. I got out of shape a little in one spot, but it won't hurt anything, and I am blaming Boo for it any way. He yelled SQUIRREL!!! right in the middle of my cut. He was quite pleased with his little joke as you can see him in the background chuckling.

    That's my story and I'm sticking to it ;)

    Stay Tuned....
     

    Attached Files:

    #47 Brian Slee, May 23, 2014
  18. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    How on earth did you get up that high to take the pic Brian ??

    ( you'r right Boo does look smug :) )

    Tweakie.
     
    #48 Tweakie, May 23, 2014
  19. Brian Slee

    Brian Slee Well-Known
    Builder

    Joined:
    Apr 26, 2014
    Messages:
    191
    Likes Received:
    59
    You mean I forgot to mention I could fly and that Boo is really Krypto in disguise :ROFL:

    Actually I am squatting a little for that picture. The three legs I have in there ATM are only about 18"

    Here is a picture from a different perspective
     

    Attached Files:

    #49 Brian Slee, May 23, 2014
  20. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    Ahh, that explains it :D

    Tweakie.
     
    #50 Tweakie, May 23, 2014
  21. Brian Slee

    Brian Slee Well-Known
    Builder

    Joined:
    Apr 26, 2014
    Messages:
    191
    Likes Received:
    59
    Ok Kids and Kiddettes,
    Here is what the layout looks lik for the brains and the brawn...

    Now I am starting to get excited :thumbsup:
     

    Attached Files:

    #51 Brian Slee, May 23, 2014
  22. John R

    John R New
    Builder

    Joined:
    Apr 28, 2014
    Messages:
    13
    Likes Received:
    2
    This sucker is coming along nicely! Curious about the threaded rod out the top - is this for belt tension? Rugged to bood - glad you're listening to Boo
     
    #52 John R, May 23, 2014
  23. Brian Slee

    Brian Slee Well-Known
    Builder

    Joined:
    Apr 26, 2014
    Messages:
    191
    Likes Received:
    59
    Thanks John,

    The stud in the top gives me a way to clamp the motors to the frame and as an anchor for the posts with the top plate acting as a brace in between. The belt tensioning will be done from underneath and each of the six belts can be adjusted independently.
     

    Attached Files:

    #53 Brian Slee, May 23, 2014
    Last edited: Jun 24, 2014
  24. John R

    John R New
    Builder

    Joined:
    Apr 28, 2014
    Messages:
    13
    Likes Received:
    2
    ah! OK, makes sense, thx! 'guess next Q is how are you going to mount the motor? It's coming along very nice! can't wait to see this thing run!! GLTY!!
     
    #54 John R, May 24, 2014
  25. Brian Slee

    Brian Slee Well-Known
    Builder

    Joined:
    Apr 26, 2014
    Messages:
    191
    Likes Received:
    59
    Hi John,

    I will use a plate with a nut on the stud and two bolts holding down the other side with tabs to keep it from rotating. I might also incorporate a heat sink into the design to help keep the motors running cooler.
     
    #55 Brian Slee, May 24, 2014
    Last edited: Jun 24, 2014
  26. Brian Slee

    Brian Slee Well-Known
    Builder

    Joined:
    Apr 26, 2014
    Messages:
    191
    Likes Received:
    59
    Hi Folks,
    Boo and I have been toiling away diligently today, and we have gotten the motor electronics all mounted, connected and the cables dressed. I think Boo is ready for a burger off the grill after all that hard work.
     

    Attached Files:

    #56 Brian Slee, May 24, 2014
    John R likes this.
  27. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    It's looking good Brian :thumbsup:

    Tweakie.
     
    #57 Tweakie, May 25, 2014
  28. Brian Slee

    Brian Slee Well-Known
    Builder

    Joined:
    Apr 26, 2014
    Messages:
    191
    Likes Received:
    59
    Thanks Tweakie...
    Now some of the real fun begins :)
     
    #58 Brian Slee, May 25, 2014
  29. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    Hi Brian,

    It's a bit off topic but this is my little helper who has now decided to trash my World Cup football - just waiting for the bang :)

    Tweakie.
     

    Attached Files:

    • a2.jpg
      a2.jpg
      File size:
      100.8 KB
      Views:
      273
    #59 Tweakie, May 26, 2014
    Mark Carew and Robert Hummel like this.
  30. Brian Slee

    Brian Slee Well-Known
    Builder

    Joined:
    Apr 26, 2014
    Messages:
    191
    Likes Received:
    59
    Good Morning Tweakie :)

    BTW Our helpers are never off topic ;) He is gorgeous. Boo wants to know if he can come play....errr help with the robot lol.
     
    #60 Brian Slee, May 26, 2014
Page 2 of 7

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice