Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

Kruk 0.1

Discussion in 'CNC Mills/Routers' started by pinoaffe, Nov 27, 2016.

Kruk 0.1

Kruk 0.1

Discussion in 'CNC Mills/Routers' started by pinoaffe, Nov 27, 2016.

This is a stool, designed in 18mm wood for a cnc router, it's easily scaleable to different wood-thicknesses, in 18mm wood it takes up 1200*1200mm. It can be assembled without screws, nails or glue and can therefore also be easily disassembled.

wood chair stool cnc lasercut router cad
  1. pinoaffe

    pinoaffe New
    Builder

    Joined:
    Nov 27, 2016
    Messages:
    2
    Likes Received:
    1
    I (pinoaffe) published a new build:

    Read more about this build...
     
    #1 pinoaffe, Nov 27, 2016
    Last edited: Nov 27, 2016
    Florian Bauereisen likes this.
  2. Julius

    Julius Well-Known
    Builder

    Joined:
    Nov 13, 2015
    Messages:
    193
    Likes Received:
    61
    Nice. it would be easy enough to change the thickness and corner radius of the cutting tool in Solidworks with the formula function. Don't think you'd want to get into # of slats and all that though
     
    #2 Julius, Nov 27, 2016
  3. pinoaffe

    pinoaffe New
    Builder

    Joined:
    Nov 27, 2016
    Messages:
    2
    Likes Received:
    1
    Thanks for the response!
    I made all of it using only free/libre software and I didn't manage to do this kind of configuration in librecad.
    I also wanted to make the proportions width/height/height of slats configureable, so it could easily be changed into a bar stool n stuff.
    When changing the other dimensions, being able to change the number of slats is essential imo - else you'd end up with really uncomfortable configurations.
     
    #3 pinoaffe, Nov 27, 2016
  4. Florian Bauereisen

    Florian Bauereisen Well-Known
    Builder

    Joined:
    Feb 24, 2014
    Messages:
    188
    Likes Received:
    60
    pretty cool
    thanks for showing

    greets

    flo
     
    #4 Florian Bauereisen, Nov 27, 2016
  5. stargeezer

    stargeezer Journeyman
    Builder

    Joined:
    Feb 20, 2015
    Messages:
    328
    Likes Received:
    117
    As a judge of several regional art and design contests - staying within the published design restrictions is VERY important. The first culling is always to cut those that did not meet the published requirements. If the artist/designer doesn't respect the rules just how good/original will their concept really be?

    For what it's worth, I'd be taking a very close look at your design, there are several points that are quite interesting. I'd love to see some pics from different angles.
     
    #5 stargeezer, Nov 27, 2016
  6. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,759
    Likes Received:
    2,438
    Great job @pinoaffe and if your looking for more software features have a look at the Autodesk 123D Make
    software, its free and fun to use. Great for lasers and CNC routers alike.
     
    #6 Mark Carew, Nov 27, 2016

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice