Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

OpenBuilds MiniMill

Discussion in 'CNC Mills/Routers' started by Mark Carew, May 26, 2017.

OpenBuilds MiniMill

OpenBuilds MiniMill

Discussion in 'CNC Mills/Routers' started by Mark Carew, May 26, 2017.

This OpenBuilds Mini Mill is a great go-to desktop sized CNC milling plate / part maker and 3D carving machine!

MiniMill CBeam CNC OpenBuilds Micro Engrave 3D
Page 3 of 11
  1. Sonny Lowe

    Sonny Lowe Journeyman
    Staff Member Builder Resident Builder

    Joined:
    Nov 11, 2015
    Messages:
    143
    Likes Received:
    158
    I'm running on a RCA Cambio Tablet, Windows 10, running at 32 bit on a 64 bit based processor, I've never had any issues with this setup...knock on wood ;)
     
    #61 Sonny Lowe, Jun 18, 2017
  2. mopar99

    mopar99 New
    Builder

    Joined:
    Dec 28, 2015
    Messages:
    10
    Likes Received:
    1
    ok, that confirm it... I need to find a 32 bit os work off of...:mad: with all the "junk" i have laying around i would have though i had something to us for it. however that give me an ideal, try the surface tablet.
     
    #62 mopar99, Jun 19, 2017
  3. Sonny Lowe

    Sonny Lowe Journeyman
    Staff Member Builder Resident Builder

    Joined:
    Nov 11, 2015
    Messages:
    143
    Likes Received:
    158
    I would have loved to use my Surface 2 tablet but you need a Surface Pro to run third party software :(
     
    #63 Sonny Lowe, Jun 19, 2017
  4. mopar99

    mopar99 New
    Builder

    Joined:
    Dec 28, 2015
    Messages:
    10
    Likes Received:
    1
    well that stinks:cry:... does LinuxCNC work:rolleyes:? may just have to do some summer cleaning to before i can invest in another pc;)...
     
    #64 mopar99, Jun 19, 2017
  5. Sonny Lowe

    Sonny Lowe Journeyman
    Staff Member Builder Resident Builder

    Joined:
    Nov 11, 2015
    Messages:
    143
    Likes Received:
    158
    I ahve no idea about LinuxCNC, maybe one of the other guys can chime in and let us know!?!?

    Haha, I know what you mean, move the old for the new :p
     
    #65 Sonny Lowe, Jun 19, 2017
  6. Peter98

    Peter98 New
    Builder

    Joined:
    Jun 30, 2017
    Messages:
    1
    Likes Received:
    0
    In the Actuator testing data something struck me as odd. The odds and even test results are almost identical so in reality all of the variability measured is between odd and even tests? Is this an over sight and something is driving this error or is there something in the methodology that i do not know?

    My guess given the 2mm pitch lead screws is accuracy should be much better than being presented?
     
    #66 Peter98, Jun 30, 2017
  7. MaryD

    MaryD OpenBuilds Team

    Joined:
    Apr 13, 2016
    Messages:
    649
    Likes Received:
    639
    3D Carving!

    Test Cut_T800 (Small).png
     
    #67 MaryD, Jun 30, 2017
    John Furjanic, mopar99, Sonny Lowe and 1 other person like this.
  8. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,895
    Likes Received:
    1,553
    #68 Rick 2.0, Jun 30, 2017
  9. MaryD

    MaryD OpenBuilds Team

    Joined:
    Apr 13, 2016
    Messages:
    649
    Likes Received:
    639
    Good eye Rick. We are releasing a new LED light ring very shortly....
     
    #69 MaryD, Jun 30, 2017
    Sonny Lowe likes this.
  10. Sonny Lowe

    Sonny Lowe Journeyman
    Staff Member Builder Resident Builder

    Joined:
    Nov 11, 2015
    Messages:
    143
    Likes Received:
    158
    This is a great example of the true 3D capabilities of this little machine, it is the very thing that drew me to it in the first place :thumbsup:

    Very cool project, I cut a few very similar skulls around Halloween last year...too much fun :D

    Can't wait to get my hands on one of the LED Rings...
     
    #70 Sonny Lowe, Jun 30, 2017
    MaryD likes this.
  11. mopar99

    mopar99 New
    Builder

    Joined:
    Dec 28, 2015
    Messages:
    10
    Likes Received:
    1
    Just be overly cautious here but does anyone have a photo of the stepper wiring? Or can confirm this one?
     

    Attached Files:

    #71 mopar99, Jul 1, 2017
  12. Julius

    Julius Well-Known
    Builder

    Joined:
    Nov 13, 2015
    Messages:
    193
    Likes Received:
    61
    just find the pairs of wires then go off that. Color combos are not a standard between all motors
     
    #72 Julius, Jul 9, 2017
  13. Alejandro M

    Alejandro M New
    Builder

    Joined:
    May 11, 2017
    Messages:
    2
    Likes Received:
    0
    Im trrying to use a GRBL Shield to operate this, what settings are you using? currently mine trembles a lot when steppers are moving and cant seem to figure out why. Thank you
     
    #73 Alejandro M, Jul 21, 2017
  14. Georgio M.

    Georgio M. New
    Builder

    Joined:
    Mar 7, 2016
    Messages:
    2
    Likes Received:
    1
    I'm hoping to get some help for a Fusion 360 build of the MiniMill. I'm putting one together from the OpenBuilds Part CAD library, but the lead screw isn't lining up. It looks about 3mm off, but the video and parts list call for a 3mm spacer. The attached file is where I'm at. Appreciate the help, and can't wait to build one in real life!
     

    Attached Files:

    #74 Georgio M., Aug 1, 2017
  15. Sonny Lowe

    Sonny Lowe Journeyman
    Staff Member Builder Resident Builder

    Joined:
    Nov 11, 2015
    Messages:
    143
    Likes Received:
    158
    Not sure I can help, but I'll try to take a look at the file later tonight...
     
    #75 Sonny Lowe, Aug 1, 2017
  16. Sonny Lowe

    Sonny Lowe Journeyman
    Staff Member Builder Resident Builder

    Joined:
    Nov 11, 2015
    Messages:
    143
    Likes Received:
    158
    I think I've got it, your mate between the 3mm spacer and the anti-back lash nut block has the spacer seated into the counterbore. The counterbore is actual smaller ID than the spacer OD, so the spacer should nest on top of the block, not recess.You may still have a slight misalignment (1mm), I think I added a 1mm precision shim to both of those spacer (total 4mm) on all Axis!?!? I'll take a look at my machine tonight and let you know for sure...

    Sonny
     
    #76 Sonny Lowe, Aug 1, 2017
    Georgio M. likes this.
  17. dddman

    dddman Journeyman
    Builder

    Joined:
    Mar 2, 2014
    Messages:
    468
    Likes Received:
    187
    Can a X-Large plate be used instead of a double one on the Z-axis? I understand that the handles would have to be removed. Would it make it less sturdy?
     
    #77 dddman, Aug 1, 2017
  18. Sonny Lowe

    Sonny Lowe Journeyman
    Staff Member Builder Resident Builder

    Joined:
    Nov 11, 2015
    Messages:
    143
    Likes Received:
    158
    I used the XL Gantry Plate (XLP) when first testing the Minimill, it worked perfectly fine. Keep in mind the other two axis see similar loads when moving, and they utilize the XLP. I found that the XLP gave you a bit more Z movement (it's shorter than the GDP) and the fact the wheels are on the outside it will allow easy adjustment if eccentric wheels if required. The Double Gantry Plate (DGP) spreads the load out wider (taller in the case of Z-Axis) so it should be inherently more stable, although I'm not 100% sure the extra stability would be noticeable!?!? I saw no significant difference between the two.

    Regards,
    Sonny

    p.s. I still ran one handle even with the XLP
     
    #78 Sonny Lowe, Aug 1, 2017
    dddman likes this.
  19. dddman

    dddman Journeyman
    Builder

    Joined:
    Mar 2, 2014
    Messages:
    468
    Likes Received:
    187
    Yesterday night spare time investment :)
     

    Attached Files:

    #79 dddman, Aug 2, 2017
    Georgio M. and Sonny Lowe like this.
  20. Georgio M.

    Georgio M. New
    Builder

    Joined:
    Mar 7, 2016
    Messages:
    2
    Likes Received:
    1
    Thanks for the help, Sonny! I was probably way sleepier than I thought. :banghead: Anywho, here's a close enough Fusion 360 model if anyone needs it.
     

    Attached Files:

    #80 Georgio M., Aug 6, 2017
    AndreMerc likes this.
  21. dddman

    dddman Journeyman
    Builder

    Joined:
    Mar 2, 2014
    Messages:
    468
    Likes Received:
    187
    Here are some updates for my minimill:

    20170807_223902.jpg

    Printed some feet on vibration dampener:
    20170807_225439.jpg

    Printed some limit switch mounts (X-, X+ (mirrored) and Zup):
    20170807_225531.jpg

    Printed some wire management:
    20170807_225605.jpg


    I just ordered the CNC xPRO V3 for the controller :)

    Does anyone have examples of their sacrificial board?

    Does anyone knows why the OB spindle mount is 71mm? It doesn't seem to fit on any spindle without adding shims...
     
    #81 dddman, Aug 7, 2017
    Sonny Lowe likes this.
  22. Anthony Bolgar

    Anthony Bolgar Journeyman
    Builder

    Joined:
    Jan 14, 2016
    Messages:
    354
    Likes Received:
    198
    If you are looking for a router mount that fits standard spindle sizes, Brandon over at SMW3d.com has some inexpensive custom aluminum ones.
     
    #82 Anthony Bolgar, Aug 8, 2017
    cdii likes this.
  23. Sonny Lowe

    Sonny Lowe Journeyman
    Staff Member Builder Resident Builder

    Joined:
    Nov 11, 2015
    Messages:
    143
    Likes Received:
    158
    "This mount works best with the Bosh Colt Router; With some additional shimming, this mount is also compatible with the Dewalt 611 Router!"
     
    #83 Sonny Lowe, Aug 8, 2017
    dddman likes this.
  24. AcBCDN

    AcBCDN New
    Builder

    Joined:
    Mar 16, 2014
    Messages:
    7
    Likes Received:
    3

    I am using LinuxCNC on my minimill.
     
    #84 AcBCDN, Aug 9, 2017
  25. Julius

    Julius Well-Known
    Builder

    Joined:
    Nov 13, 2015
    Messages:
    193
    Likes Received:
    61
    While your 3D printing, make the shim for the 611. File is on thingverse.

    As a former CBeam user, I say it's essential to use a plate with mini wheels inside and regular on the outside as well to be able to cut aluminum properly. You want to go at least 600mm/min with a single flute and .010 or more otherwise you just waste time.
     
    #85 Julius, Aug 9, 2017
  26. dddman

    dddman Journeyman
    Builder

    Joined:
    Mar 2, 2014
    Messages:
    468
    Likes Received:
    187
    Here's the plate I made for the CNC xPro, the top of the enclosure just finished printing. The hole is for a 60mm fan (50mm spacing between the holes) and I will use some 1.5 inches standoff to link them together.

    If you want to use this design, here's some tips: Screw the bottom of the standoff first, then the case_bottom to the C-beam and finally the CNC xPro to the case_bottom. wire everything up and you'll be able to add the case_top and the fan. The fan uses 4 M4x20mm screws.
     

    Attached Files:

    #86 dddman, Aug 19, 2017
    Last edited: Aug 19, 2017
    Sonny Lowe and Grantman like this.
  27. Lofton Harris

    Lofton Harris New
    Builder

    Joined:
    May 27, 2017
    Messages:
    8
    Likes Received:
    2
    Yesterday I received a 400w brushless spindle motor with power supply, PWM speed control and spindle mount. The spindle is 52mm diameter and the supplied mount doesn't fit the mini mill. So I created an adapter ring that looks like it will do the job. I'll post the stl file shortly. The spindle is way quieter than any of my routers, large, medium or small.

    CNC 400W Brushless Spindle Motor ER11 & Mach3 PWM speed controller & Mount + PSU | eBay

    My mini mill is looking like it's going to need it's own electronics cabinet, what with two power supplies, PWM and controller board.
     
    #87 Lofton Harris, Aug 25, 2017
  28. Julius

    Julius Well-Known
    Builder

    Joined:
    Nov 13, 2015
    Messages:
    193
    Likes Received:
    61
    What RPM range? Did you bog it down yet?
     
    #88 Julius, Aug 25, 2017
  29. lofton

    lofton New
    Builder

    Joined:
    Aug 13, 2015
    Messages:
    18
    Likes Received:
    2
    0-12,000 RPM. Haven't milled anything yet so don't know whether it will bog down.

    Here's the stl file for my adapter ring:
    I wrapped the outside of the spindle as well as the adapter with one layer of plastic tape to prevent slippage.
     

    Attached Files:

    #89 lofton, Aug 26, 2017
  30. lofton

    lofton New
    Builder

    Joined:
    Aug 13, 2015
    Messages:
    18
    Likes Received:
    2
    Might you be so kind as to post the stl file(s) for your endstop switch mounts? Thanks!
     
    #90 lofton, Aug 26, 2017
Page 3 of 11

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice