Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

SLA (Resin) 3D Printer

Discussion in '3D printers' started by mytechno3d, Jun 10, 2017.

SLA (Resin) 3D Printer

SLA (Resin) 3D Printer

Discussion in '3D printers' started by mytechno3d, Jun 10, 2017.

SLA LCD 3D Printer ( 8.9'' LCD screen )

SLA LCD 3D printer DLP resin makerjuice UV led
  1. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    109
    Likes Received:
    315
    #1 mytechno3d, Jun 10, 2017
  2. Anthony Bolgar

    Anthony Bolgar Journeyman
    Builder

    Joined:
    Jan 14, 2016
    Messages:
    354
    Likes Received:
    198
    How close to producing a print with this machine are you?
     
    #2 Anthony Bolgar, Jun 12, 2017
  3. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    109
    Likes Received:
    315
    Hello ,
    All is in place , i'm just waiting for a second lcd screen to replace the first one ( i broke it :mad: ).
    Fisrt print should be done next week .
    I'm pretty experimented with filament , but it will be my first time with resin ..I can not wait to try .
     
    #3 mytechno3d, Jun 12, 2017
    Anthony Bolgar likes this.
  4. Shortyski13

    Shortyski13 New
    Builder

    Joined:
    Mar 28, 2017
    Messages:
    40
    Likes Received:
    10
    Very cool and interesting! What is your total cost for the build, approximately, if you don't mind me asking?
     
    #4 Shortyski13, Jun 12, 2017
  5. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    109
    Likes Received:
    315
    I think it will be around 500-600 euro
     
    #5 mytechno3d, Jun 13, 2017
  6. jackantubis

    jackantubis New
    Builder

    Joined:
    Jan 10, 2017
    Messages:
    9
    Likes Received:
    2
    Hi, really interesting design ;-) bravo! :) can you share how work your tilt, don't really see it on the pictures, thanks.
     
    #6 jackantubis, Jun 13, 2017
  7. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    109
    Likes Received:
    315
    Picture of the Tilt system :
    I use Gcode to make the tilt movement : G1 X200 F100 ( example )
    tilt system.JPG
     
    #7 mytechno3d, Jun 13, 2017
    jackantubis likes this.
  8. staccers

    staccers New
    Builder

    Joined:
    May 15, 2016
    Messages:
    6
    Likes Received:
    0
    Resin inside LCD screen?
     
    #8 staccers, Jun 16, 2017
  9. Craig

    Craig New
    Builder

    Joined:
    Feb 27, 2014
    Messages:
    12
    Likes Received:
    22
    What are you using to spread the light out evenly through the back of the screen. I have been rounding up parts for a smaller version of yours (based on the Utopia 3D Resin Printer ) after I finish another project, and just waiting for a fresnel screen. Not sure how good it will be, while others have used mirrors to spread out the light. Would be interested in what success you have with a larger screen.
     
    #9 Craig, Jun 20, 2017
  10. Techspeakr

    Techspeakr New
    Builder

    Joined:
    Apr 13, 2015
    Messages:
    2
    Likes Received:
    0
    It would be great to see how the cam pulls the vat/lcd away from the build plate. It isn’t obvious to me how the vat is mounted to the top plate and how it is free to pivot. - Doug
     
    #10 Techspeakr, Nov 8, 2017
  11. Beëlzeblub

    Beëlzeblub New
    Builder

    Joined:
    Oct 17, 2016
    Messages:
    47
    Likes Received:
    2
    Dunno if your still on the forum but i have some questions. :)
    Why a Tilt system? and is't 395 a bit low for the UV? or do you have good results? Speeds/ress
     
    #11 Beëlzeblub, Jan 19, 2018
  12. evilc66

    evilc66 Journeyman
    Builder

    Joined:
    Jan 9, 2015
    Messages:
    393
    Likes Received:
    154
    395nm is about as low of a wavelength as you will be able to pass through the LCD screen without it being filtered out heavily. Most UV resins will cure just fine at 395nm, just slower.
     
    #12 evilc66, Mar 5, 2018
  13. N yob

    N yob New
    Builder

    Joined:
    May 14, 2019
    Messages:
    1
    Likes Received:
    0
    Can you please show a toturial on how to connect the electronics together.please
     
    #13 N yob, May 14, 2019

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice