Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

1200X600 SPHINX

Discussion in 'CNC Mills/Routers' started by blue25, Dec 12, 2017.

1200X600 SPHINX

1200X600 SPHINX

Discussion in 'CNC Mills/Routers' started by blue25, Dec 12, 2017.

Need cnc to make alumunium sign, brass stamp, etc

openbuilds cnc sphinx c beam
  1. blue25

    blue25 New
    Builder

    Joined:
    Dec 8, 2016
    Messages:
    8
    Likes Received:
    6
    #1 blue25, Dec 12, 2017
  2. blue25

    blue25 New
    Builder

    Joined:
    Dec 8, 2016
    Messages:
    8
    Likes Received:
    6
    how is to adjust eccentric spacer? spent hours but still can't get it right. also need help to tighten the wheels with the bolt
     
    #2 blue25, Dec 14, 2017
  3. blue25

    blue25 New
    Builder

    Joined:
    Dec 8, 2016
    Messages:
    8
    Likes Received:
    6
    Progress per today
    I don't know if the wheel tension right, but i have try with cordless drill and the plates moving.
    But the leadscrew is wobble. Is that because it too long? Will it affect the performance?
    Need advice here

    Y-&-Base.jpg
    Y-Axis-01.jpg
    Y-Axis-02.jpg

    Regards,
     
    #3 blue25, Dec 15, 2017
  4. Kevon Ritter

    Kevon Ritter Veteran
    Builder

    Joined:
    Apr 30, 2015
    Messages:
    597
    Likes Received:
    294
    I'm sorry that you haven't gotten a response. An 8mm lead screw simply can't handle a length this long. Alternatives include 10mm, 12mm, 3/8", and 1/2" lead screws.
     
    #4 Kevon Ritter, Jan 4, 2018
  5. ChadRat6458

    ChadRat6458 New
    Builder

    Joined:
    Dec 10, 2014
    Messages:
    93
    Likes Received:
    24
    You might try putting some tension on the lead screw.
     
    #5 ChadRat6458, Jan 4, 2018
  6. Gary Caruso

    Gary Caruso OpenBuilds Volunteer
    Staff Member Moderator Builder

    Joined:
    May 19, 2016
    Messages:
    1,193
    Likes Received:
    532
    If you have the length and it looks like you might, setup the screw collars so they put the screw in tension instead of compression, it does help.
    You will need to swap the plates around.
     
    #6 Gary Caruso, Jan 4, 2018
    Michael.M likes this.
  7. Srednasoft

    Srednasoft New
    Builder

    Joined:
    Jul 24, 2017
    Messages:
    14
    Likes Received:
    2
    Hi,
    Did it work out well with the 2.2kw water cooled spindle on your Sphinx?
    I have ordered the same type of spindle for my Kyo Sphinx, but I’m worried about the weight.
     
    #7 Srednasoft, May 4, 2020
  8. Kevon Ritter

    Kevon Ritter Veteran
    Builder

    Joined:
    Apr 30, 2015
    Messages:
    597
    Likes Received:
    294
    I would not recommend anything above 1.5kW. Honestly, even an 800W will be more than enough for this platform, especially if you go with a larger work area.
     
    #8 Kevon Ritter, May 4, 2020
    Peter Van Der Walt and Srednasoft like this.
  9. Srednasoft

    Srednasoft New
    Builder

    Joined:
    Jul 24, 2017
    Messages:
    14
    Likes Received:
    2
    The Size of my machine is 600x800 so it’s not super large.
    On my old machine I used a Makita router and I have many milling bits with 8mm shank. The ER11 1.5kW has a max collet size of 7mm. That is why I chose the ER20 model. But I can see the weight could be a big problem. Around 5kg on that spindle:(
     
    #9 Srednasoft, May 5, 2020
  10. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,050
    Likes Received:
    4,313
    I've got some ER11 8mm collets sitting on my desk, Aliexpress has them up to 10mm

    10mm.PNG
     
    #10 Peter Van Der Walt, May 5, 2020
    Srednasoft likes this.
  11. Srednasoft

    Srednasoft New
    Builder

    Joined:
    Jul 24, 2017
    Messages:
    14
    Likes Received:
    2
    #11 Srednasoft, May 5, 2020
    Last edited: May 5, 2020
    Giarc likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice