Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

5 X 5 Plasma SIMPLE Build

Discussion in 'Laser Cutters' started by devloop, Jan 6, 2018.

5 X 5 Plasma SIMPLE Build

5 X 5 Plasma SIMPLE Build

Discussion in 'Laser Cutters' started by devloop, Jan 6, 2018.

5 X 5 Plasma table...Hypertherm 45 XP....CandCNC....Openbuilds

SIMPLE 5 x Plasma Table build
Page 3 of 4
  1. devloop

    devloop Well-Known
    Builder

    Joined:
    Dec 9, 2017
    Messages:
    62
    Likes Received:
    91
    I did not run into any collision issues with bolts either, use the correct length of bolt
     
    #61 devloop, Apr 24, 2018
  2. Gary Caruso

    Gary Caruso OpenBuilds Volunteer
    Staff Member Moderator Builder

    Joined:
    May 19, 2016
    Messages:
    1,193
    Likes Received:
    532
    yeah i wondered how that would work out, I would just make it flat plate and use standoffs on the motor to get the jog for the pulley clearance. would be cheaper too
     
    #62 Gary Caruso, Apr 24, 2018
  3. devloop

    devloop Well-Known
    Builder

    Joined:
    Dec 9, 2017
    Messages:
    62
    Likes Received:
    91
    You are right, flat plate and spacers would work, a good forming operator can do it, bend allowance has to be exact
     
    #63 devloop, Apr 24, 2018
  4. retribution

    retribution New
    Builder

    Joined:
    Apr 10, 2018
    Messages:
    11
    Likes Received:
    1
    Good point on the flat plate with standoffs, cheaper and easier to implement.
     
    #64 retribution, Apr 24, 2018
  5. retribution

    retribution New
    Builder

    Joined:
    Apr 10, 2018
    Messages:
    11
    Likes Received:
    1
    Revised my Z Gantry Plates again, I widened the distance between the wheels as you mentioned then realized I had the wrong NEMA 23 motor so I added the high torque version which required recreating the belt again too. This CAD stuff is a can of worms sometimes. Anyway, I think this should be the final version. Here are a couple of images.
     

    Attached Files:

    #65 retribution, Apr 27, 2018
    Kyo likes this.
  6. Cliffabian

    Cliffabian New
    Builder

    Joined:
    Jun 4, 2018
    Messages:
    3
    Likes Received:
    1
    Good job bro...hope to see more videos how it cuts thin sheet, maybe with a feedrate around 6000-7000 mm/min....if the machine rigid enough also if the THC responsive too...
    btw mine has Nema 34, rack pinion, Hiwin LM guide, Gecko G201X, Powermax 65, Neuron THC, already ran to 7000 pierces.
    My next machine should be like yours, simple and works good
     
    #66 Cliffabian, Jun 6, 2018
  7. ALAIN ROY

    ALAIN ROY New
    Builder

    Joined:
    May 30, 2014
    Messages:
    1
    Likes Received:
    0
    Super Design , on 200 ca$ scale what is the final cost of the project with out the plasma cutter , if i may ask ?
    In process of evaluating the cost vs buying new ,use and soon on ...
    Great Job.
    Alain
     
    #67 ALAIN ROY, Jun 10, 2018
  8. devloop

    devloop Well-Known
    Builder

    Joined:
    Dec 9, 2017
    Messages:
    62
    Likes Received:
    91
    About $4500 without the plasma
     
    #68 devloop, Jun 13, 2018
    stargeezer likes this.
  9. Alex Aguirre

    Alex Aguirre New
    Builder

    Joined:
    Dec 18, 2017
    Messages:
    1
    Likes Received:
    0
    great build!! do you have the files for the cross beams that connect the legs?
     
    #69 Alex Aguirre, Jul 9, 2018
  10. stargeezer

    stargeezer Journeyman
    Builder

    Joined:
    Feb 20, 2015
    Messages:
    328
    Likes Received:
    117
    Hi Devloop! Awesome build and really dig how open you have been about the build. I look forward to following it through to completion!

    I am just finishing the WorkBee 1010 kit from Openbuilds and have been considering hooking my plasma cutter up in place of a spindle or router (I have a few other CNC Routers, but no plasma cutter table).

    Wish you lots of success with it.
    Larry
     
    #70 stargeezer, Jul 11, 2018
  11. retribution

    retribution New
    Builder

    Joined:
    Apr 10, 2018
    Messages:
    11
    Likes Received:
    1
    Hello, May I ask what size the NEMA motors are? 23 or 34 and the Oz. In. Please

    Chris
     
    #71 retribution, Jul 22, 2018
  12. EVC_74

    EVC_74 New
    Builder

    Joined:
    Feb 13, 2015
    Messages:
    6
    Likes Received:
    2
    What a great table! I looked at torchmate model 4400, called and $25k. it is a great design, but 25K! I love that you did not over-engineer and kept it simple (I tend to over-engineer).. I built a Ox table 5' x 5', very similar. Now I'm looking to get into a plasma table. Any chance you could provide design files? I'd love to build this, but as any side project, I have to evaluate the time aspect. Design files would obviously take 50% of time out. Thanks again for publishing such a nice, simple design. Water table and fume hood would be great additions to this baby! I also look at my large OX, and say, with a different head, I could easily mount my router and cut wood!
     
    #72 EVC_74, Aug 26, 2018
  13. RanchRifle

    RanchRifle New
    Builder

    Joined:
    Oct 22, 2016
    Messages:
    10
    Likes Received:
    3
    May I ask what CAD and CAM software you are using?
     
    #73 RanchRifle, Dec 1, 2018
  14. Tracy Ranson

    Tracy Ranson Well-Known
    Builder

    Joined:
    Nov 4, 2014
    Messages:
    88
    Likes Received:
    32
    I have a dumb question, I see that you are using an angled torch handle with a trigger to activate the plasma torch. How do you activate the plasma torch? Did you have to bypass the switch in some way? Are there instructions on how to do that? What sort of controller are you using to get the torch to touch the workpiece prior to the torch retracting slightly and start cutting. I am using a Hobart 12i and I have been pulling my hair out trying to get the electronics figured out. I have the steppers running great, it's the torch control that I need help with, I use mach 3 and from time to time I also use linuxcnc any advice would be great. Nice looking machine
     
    #74 Tracy Ranson, Feb 15, 2019
  15. Puddly Fuggerson

    Puddly Fuggerson New
    Builder

    Joined:
    Nov 2, 2018
    Messages:
    2
    Likes Received:
    1
    great build thanks for posting
     
    #75 Puddly Fuggerson, Feb 20, 2019
  16. cadprecision

    cadprecision New
    Builder

    Joined:
    Mar 3, 2019
    Messages:
    1
    Likes Received:
    0
    Can someone please guide me in the right direction where to download dxf or step files for this project? Thanks a bunch!
     
    #76 cadprecision, Mar 7, 2019
  17. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,017
    Likes Received:
    1,682
    Gh
    The author would have to upload them to the files and drawing portion of the build.
     
    #77 Giarc, Mar 7, 2019
  18. Spencer Lemmon

    Spencer Lemmon New
    Builder

    Joined:
    Jul 10, 2019
    Messages:
    1
    Likes Received:
    0
    any chance you could upload the dxf files for the 4 J-shaped side pieces and the U-shaped cross member?
     
    #78 Spencer Lemmon, Jul 11, 2019
  19. devloop

    devloop Well-Known
    Builder

    Joined:
    Dec 9, 2017
    Messages:
    62
    Likes Received:
    91
    I think they're in this discussion panel, they are very straight forward, just don't exceed the length of the C beam, you cut the gantry c beam to length
     
    #79 devloop, Jul 25, 2019
  20. sonex761

    sonex761 New
    Builder

    Joined:
    Aug 25, 2017
    Messages:
    6
    Likes Received:
    0
    I love your build. I have been wanting to build a CNC plasma table for several years now. I started designing my own, but just don't have the time. I would like to build one like you have designed. Would you be willing to share your files?
     
    #80 sonex761, Sep 11, 2019
  21. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    #81 sharmstr, Sep 11, 2019
    Mark Carew likes this.
  22. sonex761

    sonex761 New
    Builder

    Joined:
    Aug 25, 2017
    Messages:
    6
    Likes Received:
    0
    I didn't see any of the plates for the torch holder and head.

    Stephen
     
    #82 sonex761, Sep 16, 2019
  23. devloop

    devloop Well-Known
    Builder

    Joined:
    Dec 9, 2017
    Messages:
    62
    Likes Received:
    91
    Yes had to bypass a safety in the plasma in order to get the software to trigger it, with Hypertherm it was easy, not too sure on others
     
    #83 devloop, Oct 4, 2019
  24. JoseminuX

    JoseminuX New
    Builder

    Joined:
    Jan 1, 2020
    Messages:
    1
    Likes Received:
    0
    You have the assembly files for solidworks I would love to build a plasma cutter. Thanks
     
    #84 JoseminuX, Jan 1, 2020
  25. Bud Griffin

    Bud Griffin New
    Builder

    Joined:
    Sep 14, 2015
    Messages:
    7
    Likes Received:
    16
    This is a great build. Would love the files for build.
     
    #85 Bud Griffin, Jan 12, 2020
  26. devloop

    devloop Well-Known
    Builder

    Joined:
    Dec 9, 2017
    Messages:
    62
    Likes Received:
    91
    my files are scattered throughout this forum, thanks
     
    #86 devloop, Jan 12, 2020
  27. Bud Griffin

    Bud Griffin New
    Builder

    Joined:
    Sep 14, 2015
    Messages:
    7
    Likes Received:
    16
    Went back through the whole thread and found them. Thanks.
     
    #87 Bud Griffin, Jan 12, 2020
  28. LoCo DIYer

    LoCo DIYer New
    Builder

    Joined:
    Feb 7, 2020
    Messages:
    5
    Likes Received:
    3
    Morning! We're you able to find the entire 3D assembly?
     
    #88 LoCo DIYer, Feb 9, 2020
  29. Bud Griffin

    Bud Griffin New
    Builder

    Joined:
    Sep 14, 2015
    Messages:
    7
    Likes Received:
    16
    Yes. Found them.

    Thanks
     
    #89 Bud Griffin, Feb 9, 2020
    LoCo DIYer likes this.
  30. LoCo DIYer

    LoCo DIYer New
    Builder

    Joined:
    Feb 7, 2020
    Messages:
    5
    Likes Received:
    3
    Morning Bud,
    I hate to pester, but I was not as fortunate as you. I have found dxf files and lots of pictures but after going thru the 3 pages of conversations I could not find much anything in terms of 3D models. Would you mind posting all of the 3D files at once? That would be oh so very much appreciated.
    Thanks
    LC
     
    #90 LoCo DIYer, Feb 10, 2020
    Iepermaker likes this.
Page 3 of 4

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice