Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

C-Beam Machine Too

Discussion in 'CNC Mills/Routers' started by Metalguru, Jun 28, 2016.

C-Beam Machine Too

C-Beam Machine Too

Discussion in 'CNC Mills/Routers' started by Metalguru, Jun 28, 2016.

C-Beam Machine upgrade using linear rails to increase machining size by 2.5 times and increase rigidity

linear rail c-beam machine improvement electronics module
  1. Metalguru

    Metalguru Veteran
    Builder

    Joined:
    Dec 29, 2015
    Messages:
    752
    Likes Received:
    548
    Metalguru published a new build:

    Read more about this build...
     
    #1 Metalguru, Jun 28, 2016
    Quoc Anh Le, Paul Stoller and TerryOx like this.
  2. TerryOx

    TerryOx Well-Known
    Builder

    Joined:
    Apr 1, 2016
    Messages:
    90
    Likes Received:
    30
    Nice work.
     
    #2 TerryOx, Jun 28, 2016
  3. Quoc Anh Le

    Quoc Anh Le New
    Builder

    Joined:
    Oct 15, 2015
    Messages:
    7
    Likes Received:
    0
    can you convert to sketchup 2015? Thanks
     
    #3 Quoc Anh Le, Jun 30, 2016
  4. Metalguru

    Metalguru Veteran
    Builder

    Joined:
    Dec 29, 2015
    Messages:
    752
    Likes Received:
    548
    Here you go Quoc!
     

    Attached Files:

    #4 Metalguru, Jun 30, 2016
  5. Metalguru

    Metalguru Veteran
    Builder

    Joined:
    Dec 29, 2015
    Messages:
    752
    Likes Received:
    548
    I moved the stuff that was here into the build section.
     
    #5 Metalguru, Jul 14, 2016
  6. Bad Sequel

    Bad Sequel Well-Known
    Builder

    Joined:
    Aug 19, 2015
    Messages:
    83
    Likes Received:
    32
    Great looking machine! :thumbsup:
     
    #6 Bad Sequel, Jul 15, 2016
  7. slm222

    slm222 New
    Builder

    Joined:
    May 17, 2016
    Messages:
    23
    Likes Received:
    2
    looks great.. so to understand a little more about the linear rails. they bolted up to the v slot rail (20x40?) with insert nuts or did you have to drill into the v slot rail
     
    #7 slm222, Jul 15, 2016
  8. Metalguru

    Metalguru Veteran
    Builder

    Joined:
    Dec 29, 2015
    Messages:
    752
    Likes Received:
    548
    Hey slm222 :

    Yes, its a 20x40mm v-slot. The mounting holes on the linear rail were just a bit closer together than the centers of the v-slot, which are 20mm, I think they were about 19mm or so. Odd hole spacing, just enough so I could not get a screw into a t-nut in the slot. Come to think of it, maybe they were 3/4", which is pretty close to 19mm. Doesn't make much sense for them to be inch spacing, when everything else was metric...

    Anyway, I did not modify the v-rail. I solved the problem by drilling out the mounting holes on the linear rail as much as I could without breaking through the edge. They were 5mm to start out with, I think I drilled them out to about 5.6mm or so. This gave just enough extra width clearance so a standard low profile screw would go through the hole and into a regular t-nut.
     
    #8 Metalguru, Jul 15, 2016
    slm222 likes this.
  9. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,758
    Likes Received:
    2,440
    @Metalguru again just want to jump in here to say what a great job you have done on this Build and the helpful mods that really makes this machine be the best it can be. :thumbsup:
     
    #9 Mark Carew, Mar 16, 2018
  10. Rpafenberg

    Rpafenberg New
    Builder

    Joined:
    Dec 10, 2016
    Messages:
    8
    Likes Received:
    2
    Metalguru,

    What do you use for clamps. With the T slot on perimeter of the table there doesn't seem to be any place for a clamp to gain leverage on its back side.
     
    #10 Rpafenberg, Mar 8, 2019
  11. Metalguru

    Metalguru Veteran
    Builder

    Joined:
    Dec 29, 2015
    Messages:
    752
    Likes Received:
    548
    Made my own out of wood. Just a 1" wide strip of baltic birch plywood with a slot and a groove on the end. They sit on top of the angle on the bed, and the bolt provides reasonable clamping force. You can make them various lengths. I also use fender washers on the bolts, and all kinds of other jury rigged gizmos depending on my needs. Mostly, for wood I use double sided tape.

    MG
     
    #11 Metalguru, Mar 8, 2019
  12. Rpafenberg

    Rpafenberg New
    Builder

    Joined:
    Dec 10, 2016
    Messages:
    8
    Likes Received:
    2
    Thanks, I have used your build as a guide on the modifications to my XL and found that my previous clamps would not provide the clamping ability I had previously.
     
    #12 Rpafenberg, Mar 8, 2019
  13. Metalguru

    Metalguru Veteran
    Builder

    Joined:
    Dec 29, 2015
    Messages:
    752
    Likes Received:
    548
    Feel free to relocate the tee track anywhere you like to make your clamps work. The build is only a suggestion, modify it to suit your situation.

    MG
     
    #13 Metalguru, Mar 8, 2019

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice