Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

Workbee 1050 Screw Driven

Discussion in 'CNC Mills/Routers' started by msdosfx, Feb 10, 2019.

Workbee 1510 Screw Driven

Workbee 1510 Screw Driven

Discussion in 'CNC Mills/Routers' started by msdosfx, Feb 10, 2019.

Workbee 1510 screw driven build by MsDosFX.

Workbee CNC xpro screw driven arduino cnc shield
  1. msdosfx

    msdosfx New
    Builder

    Joined:
    Oct 9, 2018
    Messages:
    16
    Likes Received:
    13
    #1 msdosfx, Feb 10, 2019
    Alex Chambers likes this.
  2. Alex Chambers

    Alex Chambers Master
    Moderator Builder

    Joined:
    Nov 1, 2018
    Messages:
    2,784
    Likes Received:
    1,364
    Nice build! Mine is the 1010 but, like you I intend to mount the spoiler board at the lower position. If I think I need a bit more rigidity for finer work I will build up the spoiler board.
    Alex.
     
    #2 Alex Chambers, Feb 10, 2019
  3. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    No need to fiddle with the speed settings. Its okay that it outputs spindle speed even though you have a router. All of my fusion post have it but like you I manually control it with the dial on the router. That is until I get my SuperPID hooked up.

    I'll be interested to see how well that baby lead screw works on the Y axis. I think you'll get a lot of whip. You can see it sagging just sitting there.
     
    #3 sharmstr, Feb 10, 2019
    Last edited: Feb 10, 2019
  4. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,758
    Likes Received:
    2,440
    Great looking Build @msdosfx the lower bed is a really nice addition.
     
    #4 Mark Carew, Mar 24, 2019
  5. jbenedetto84

    jbenedetto84 New
    Builder

    Joined:
    Oct 30, 2018
    Messages:
    2
    Likes Received:
    1
    Great looking build. I have a workbee 1510 and I hate the belt drive and have been considering upgrading to lead screw on the 1500mm axis. Can you tell me what parts you had to buy from OB to completely convert to lead screw?
     
    #5 jbenedetto84, Jul 22, 2019
    Anthony J Zamitalo likes this.
  6. msdosfx

    msdosfx New
    Builder

    Joined:
    Oct 9, 2018
    Messages:
    16
    Likes Received:
    13
    Hi, I didn't buy the parts from Open Builds. If you search for SPAM 3D on ebay or Ali-express and find the 1510 screw driven Workbee, it should have a parts list, which you can then figure out the parts you need to order from OB, ebay, or wherever. I think basically you are going to need two 1500mm acme screws, the spring connectors to attach the screws to the acme screw (just like on your Z axis) and the plastic pieces that move the gantry on the acme screw. A lot of people say you will have problems with lashback with an acme screw that long, but I haven't. I have mostly been milling foam, MDF, and a little UHMW plastic, so maybe if I were milling aluminum I would notice. It is long to the point that it droops in the middle, but I have yet to have any issues. I have run the machine sporadically for maybe a total of 20 or 30 hours.
     
    #6 msdosfx, Jul 23, 2019
  7. jbenedetto84

    jbenedetto84 New
    Builder

    Joined:
    Oct 30, 2018
    Messages:
    2
    Likes Received:
    1
    Thanks for your help and quick reply! I will check SPAM 3d out.
     
    #7 jbenedetto84, Jul 23, 2019

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice