Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

BlackBox

Discussion in 'Other Builds' started by Mark Carew, Feb 22, 2019.

BlackBox Motion Control System

BlackBox Motion Control System

Discussion in 'Other Builds' started by Mark Carew, Feb 22, 2019.

The Openbuilds BlackBox is a new system evolved around a set of subsystems that cover more than just control and also more than just CNC type applications! With a plug-and-play easy connection system this controller can be used with ease, without sacrificing power.

BlackBox Controller driver ecosystem powerful cnc
Page 13 of 30
  1. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,050
    Likes Received:
    4,313
    Here's a Video showing how Easy:



    :) Give us a Subscribe while you are there, awesome tutorial videos all the time!
     
    #361 Peter Van Der Walt, Jun 3, 2019
    David the swarfer likes this.
  2. jbell

    jbell New
    Builder

    Joined:
    Jul 24, 2016
    Messages:
    46
    Likes Received:
    2
    In the list f machines OX is not listed. Is there a comparable machine? Can fusion 360 work with your recommendations as the CAD?
    I've just ordered the box so I guess I'm committed.
     
    #362 jbell, Jun 4, 2019
  3. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    Whats more important than the machine model is the motors you are using on that machine. If you have OB motors, you're good. If not, check the specs on the motors and make sure the bb drivers can drive them (3.2A Stepper Drivers (Max rating 4A). The BB is grbl based so you need to use a grbl post processor. The one that comes with Fusion doesnt work well. Use this one: swarfer/GRBL-Post-Processor Use OB Control to send it: OpenBuilds Software - FREE Software for CNC Control: OpenBuilds CONTROL and OpenBuilds CAM
     
    #363 sharmstr, Jun 4, 2019
  4. jbell

    jbell New
    Builder

    Joined:
    Jul 24, 2016
    Messages:
    46
    Likes Received:
    2
    I'm using Nema 23
     

    Attached Files:

    #364 jbell, Jun 4, 2019
  5. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    Cant see the current rating :)
     
    #365 sharmstr, Jun 4, 2019
  6. jbell

    jbell New
    Builder

    Joined:
    Jul 24, 2016
    Messages:
    46
    Likes Received:
    2
    2.8 amps
     
    #366 jbell, Jun 4, 2019
  7. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    You'll be fine. Hit me up if you haven any fusion to grbl issues/questions.
     
    #367 sharmstr, Jun 4, 2019
    Peter Van Der Walt likes this.
  8. jbell

    jbell New
    Builder

    Joined:
    Jul 24, 2016
    Messages:
    46
    Likes Received:
    2
    Thanks, I'll wait until the bb arrives and then try a test.
     
    #368 jbell, Jun 4, 2019
  9. Rob Mitchell

    Rob Mitchell Well-Known
    Builder

    Joined:
    Nov 29, 2015
    Messages:
    105
    Likes Received:
    35
    Any suggestions on connecting to the Blackbox wirelessly / remotely. I would like to use my windows tablet but find connecting with a dongle and USB cable too cumbersome.
     
    #369 Rob Mitchell, Jun 9, 2019
  10. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    Not exactly what you want, but if you use OB control, you can use the jog widget on your phone. You'd still need the tablet connected via USB. And its another device, but at least you're wireless for 90% of what you need to do.
     
    #370 sharmstr, Jun 9, 2019
  11. Skip S.

    Skip S. Well-Known
    Builder

    Joined:
    Jun 6, 2018
    Messages:
    63
    Likes Received:
    23
    So I'm ignorant of the capabilities of grbl in relation to tool offsets..
    In the grbl 1.1 on the black box can we use g41/g42 commands for tool diameter compensation?
    I get confused in the wiki because it goes from grbl to linuxcnc grbl in the explanation.. (there's a difference?)

    Thanks - sorry to partially derail the conversation
     
    #371 Skip S., Jun 10, 2019
  12. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,050
    Likes Received:
    4,313
    Refer to gnea/grbl > about halfway down lists all the GCODE Grbl Understands. Tool Length offset is supported (somewhat) but not Diameter.

    Grbl Wiki lists what is supported, LinuxCNC Reference helps user understand what a given GCODE does (Only a subset of the LinuxCNC standard is contained in Grbl)
     
    #372 Peter Van Der Walt, Jun 10, 2019
    David the swarfer and Skip S. like this.
  13. Skip S.

    Skip S. Well-Known
    Builder

    Joined:
    Jun 6, 2018
    Messages:
    63
    Likes Received:
    23
    Ok, Thank you!
     
    #373 Skip S., Jun 10, 2019
    Peter Van Der Walt likes this.
  14. razohrer

    razohrer New
    Builder

    Joined:
    Jun 4, 2018
    Messages:
    3
    Likes Received:
    1
    Hi were you able to get the BlackBox to turn on spindle on through the VFD ? If so would you mind sharing info on this? I have a Huanyeng VFD and can't seem to get it to start the spindle with the M3 command. I've set PD01 and PD02 on the VFD both to 1 but no luck!
     
    #374 razohrer, Jun 10, 2019
  15. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    Make sure your jumpers are set correctly: OpenBuilds BlackBox 4X Documentation

    You also need to send an S command with M3. ie. M3 S1000
     
    #375 sharmstr, Jun 11, 2019
    Mark Carew and Peter Van Der Walt like this.
  16. razohrer

    razohrer New
    Builder

    Joined:
    Jun 4, 2018
    Messages:
    3
    Likes Received:
    1
    Thanks, yes that was it. Got spindle running and speed control running through the Huangyeng VFD...very cool
     
    #376 razohrer, Jun 12, 2019
    sharmstr likes this.
  17. jbell

    jbell New
    Builder

    Joined:
    Jul 24, 2016
    Messages:
    46
    Likes Received:
    2
    Just got my BB. How do I get Swarfer/GRBL post processor into Fusion 360? I've downloaded it and gave it a try but can't find how to do it. These screen shots are what I have downloaded.
    Screenshot (9).png Screenshot (9).png Screenshot (10).png
     
    #377 jbell, Jun 12, 2019
  18. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    #378 sharmstr, Jun 12, 2019
  19. jbell

    jbell New
    Builder

    Joined:
    Jul 24, 2016
    Messages:
    46
    Likes Received:
    2
    Followed directions but still didn't show up. There is a GRBL in the file that was updated June 3, 2019.

    The recommendation from Peter showed up and then disappeared. Not having much luck. I wonder if I downloaded the right file?
     
    #379 jbell, Jun 12, 2019
  20. Alex Chambers

    Alex Chambers Master
    Moderator Builder

    Joined:
    Nov 1, 2018
    Messages:
    2,784
    Likes Received:
    1,364
    You need to copy the OpenbuildsGRBL.cps file into your Fusion 360 post processor directory. @sharmstr's link on how to use a local post processor tells you where that is.
    Alex.
     
    #380 Alex Chambers, Jun 12, 2019
  21. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    Here are the steps:

    Go here: swarfer/GRBL-Post-Processor

    Click on the big green download button.

    Click on download zip.

    Unzip the file.

    When you are ready to post, click on the 3 dots in the "configuration folder" field

    Find the folder you extracted and click open.

    Now down in Post configuration, select OpenbuildsGRBL

    fusion.png

    We know this works since its how we all do it :) Okay, maybe just me.
     
    #381 sharmstr, Jun 12, 2019
    Last edited: Jun 12, 2019
    Peter Van Der Walt likes this.
  22. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    No you dont
     
    #382 sharmstr, Jun 12, 2019
  23. jbell

    jbell New
    Builder

    Joined:
    Jul 24, 2016
    Messages:
    46
    Likes Received:
    2
    I know I must be close but the conf box won't open
     

    Attached Files:

    #383 jbell, Jun 12, 2019
  24. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    I think you need to go one more level deeper. c:\.....\GRBL-Post-Processor-Master\GRBL-Post-Processor-Master. Basically, you need to select the folder where the files are.
     
    #384 sharmstr, Jun 12, 2019
  25. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,059
    Likes Received:
    1,448
    I just went through the steps I gave you. I exacted the files to my desktop like you have done. The extract will create two levels of 'grbl-post-processor-master' so you need to make sure you select the one that's inside the other. (I have an appt and wont be back for a few hours. Good luck :)

    upload_2019-6-12_15-29-1.png


    grb-grbl.png
     
    #385 sharmstr, Jun 12, 2019
  26. jbell

    jbell New
    Builder

    Joined:
    Jul 24, 2016
    Messages:
    46
    Likes Received:
    2
    Thanks shermstr
    Got it to work so I assume that I'll open it from my desktop when needed as it is not listed in the configerations. That works for me.
    Now to finish the BB assembly.
     
    #386 jbell, Jun 12, 2019
  27. brab626

    brab626 New
    Builder

    Joined:
    May 10, 2019
    Messages:
    8
    Likes Received:
    10
    do you mind sharing how you connected it i have the same vfd but have no clue what pins it uses
     
    #387 brab626, Jun 12, 2019
  28. devloop

    devloop Well-Known
    Builder

    Joined:
    Dec 9, 2017
    Messages:
    62
    Likes Received:
    91
    I understand the software and controller works for a router table, but can it do z touch offs for plasma if I use a floating head?
     
    #388 devloop, Jun 15, 2019
  29. devloop

    devloop Well-Known
    Builder

    Joined:
    Dec 9, 2017
    Messages:
    62
    Likes Received:
    91
    I want to use Ohmic sensing so the Z axis can drive the torch down until it touches the plate and then move up to a certain height that works for the thickness of sheet metal I'm cutting, the Z-probe Openbuilds offers is similar, will it work?
     
    #389 devloop, Jun 15, 2019
  30. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    15,050
    Likes Received:
    4,313
    The Probe input on Grbl is non continuous (can only used for intial height sensing)
    See docs.openbuilds.com/blackbox > plasma wiring page shows the use of a floating head switch
     
    #390 Peter Van Der Walt, Jun 16, 2019
Page 13 of 30

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice