Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

CubeSpawn 3 Axis Mill

Discussion in 'CNC Mills/Routers' started by CubeSpawn, May 27, 2014.

CubeSpawn 3 Axis Mill Module

CubeSpawn 3 Axis Mill Module

Discussion in 'CNC Mills/Routers' started by CubeSpawn, May 27, 2014.

Small Form factor based 3 axis Gantry style mill, Removeable mechanical module. Removable Electronics. with a removable machine pallet, for automation.

CubeSpawn CNC Mill Raspberry-Pi R-Pi SmoothieBoard Smoothie ROS MTConnect Modular Flexible Manufacturing System FMS
  1. CubeSpawn

    CubeSpawn New
    Builder

    Joined:
    May 18, 2014
    Messages:
    22
    Likes Received:
    10
    CubeSpawn published a new build:

    Read more about this build...
     
    #1 CubeSpawn, May 27, 2014
  2. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,762
    Likes Received:
    2,446
    Great looking project @CubeSpawn Look forward to following along with the progress :)
     
    #2 Mark Carew, May 27, 2014
    CubeSpawn likes this.
  3. bobt

    bobt Well-Known
    Builder

    Joined:
    Dec 4, 2013
    Messages:
    89
    Likes Received:
    38
    James I put a post up on the google+ site on a suggestion on this project.

    Bob
     
    #3 bobt, May 27, 2014
    CubeSpawn likes this.
  4. CubeSpawn

    CubeSpawn New
    Builder

    Joined:
    May 18, 2014
    Messages:
    22
    Likes Received:
    10
    Awesome!, It may be blasphemy, but I'll only be modifying the existing design with regard to the motion components to OpenBuilds for now... IF a little momentum can be found for Cube building, I feel new designs will come forth independently far faster than I'd be capable of on my own... ;-)
    Also, Incremental changes to a base design means that a new concept doesn't need to be built from scratch, instead it will simply be a variation on an existing design...thereby speeding up the process...
     
    #4 CubeSpawn, May 28, 2014
  5. bobt

    bobt Well-Known
    Builder

    Joined:
    Dec 4, 2013
    Messages:
    89
    Likes Received:
    38
    #5 bobt, May 28, 2014
  6. CubeSpawn

    CubeSpawn New
    Builder

    Joined:
    May 18, 2014
    Messages:
    22
    Likes Received:
    10
    I think I should give some more thought to a design for a "pallet mover" that can hand-off the work as its completed by a cell.
    The first run at it involved some spare rollers I had:
     
    #6 CubeSpawn, May 28, 2014
  7. gjbroom

    gjbroom New
    Builder

    Joined:
    Jun 30, 2014
    Messages:
    2
    Likes Received:
    0
    Thus, if I understand correctly, the exterior cube (Model 625) remains the standard, but EE trays and mech trays can be built out of OpenBuilds V-slot, Misumi 2020, OpenRail (15x15), ... whatever we want, as long as their outside dimensions match up to the insides of the 625 cube (and any other interconnection points: backplane connectors, pallet loaders, etc)
     
    #7 gjbroom, Sep 30, 2014
  8. CubeSpawn

    CubeSpawn New
    Builder

    Joined:
    May 18, 2014
    Messages:
    22
    Likes Received:
    10
    That's the goal!, and the 625 frame and carriers could be Misumi 25mm for that matter if you felt like re-rollng the frame specs - I originally had a "610" which was the whole thing done with 1 inch extrusion, but I lost confidence that subtle incompatibilities would creep in and screw everyone up at some point... The interior implementation of the "Mechanical Module" is intended to be entirely up to you!! (and the electrical/electronic as well) - it may take a bit for pin-outs and such to gel - but we are all in it together...

    The pallet mover design is being implemented this week - here are some drawings and a photo, more this week after I machine the rails for the first one : if you scroll through images 50 - 56 it will be clear what I'm thinking - if anyone has a better idea, please let me know!! :)

    https://picasaweb.google.com/103828779781480193226/DougSShop#6064197539893572994
     
    #8 CubeSpawn, Sep 30, 2014
  9. CubeSpawn

    CubeSpawn New
    Builder

    Joined:
    May 18, 2014
    Messages:
    22
    Likes Received:
    10
    Also: if I have failed to disclose something needed: i.e, dimension, thread-pitch, diameter etc, let me know, if something doesn't make sense to you, ask me and I'll try to clarify whatever it is...

    I'll post the model of the pallet mover conveyor later today and review some changes I have made to other models.
     
    #9 CubeSpawn, Oct 1, 2014
  10. CubeSpawn

    CubeSpawn New
    Builder

    Joined:
    May 18, 2014
    Messages:
    22
    Likes Received:
    10
    #10 CubeSpawn, Oct 3, 2014
  11. gjbroom

    gjbroom New
    Builder

    Joined:
    Jun 30, 2014
    Messages:
    2
    Likes Received:
    0
    Cool. Thanks. When I looked at some of the sketchup models, the mounting rails were not present and the mechanical box was exactly 550mm wide whereas recent pictures show mounting rails. OK, so rails are definitely still part of the spec based on this BOM. So now I'm trying to picture how the mechanical tray goes together, I can't figure out where all these rails go.

    6 -- 400x25x12.5 aluminum barstock

    2 -- 300x25x12.5 aluminum barstock [bottom rail]
    4 -- 300x25x12.5 delrin barstock [middle and top rail]

    The 400mm long bars mount onto the mech tray and the rest of them mount onto the outer cube frame? Here's a picture of what I'm thinking. My poor 3d drawing skills are attempting to show one side of the outer cube frame. The mechanical tray would have rails on the corresponding cross pieces, so it would end up sitting 25mm above the floor when slid in.

    Or am I off-base?
     

    Attached Files:

    #11 gjbroom, Oct 3, 2014
  12. CubeSpawn

    CubeSpawn New
    Builder

    Joined:
    May 18, 2014
    Messages:
    22
    Likes Received:
    10
    Looking through the images and sure enough, I mentioned it in passing and never illustrated how the rails are mounted, or taken a clear picture of them:

    so: SlidingRails.png
    here is a render, and I'll take a clear picture next week -- here is a picture of the rails, lying on top of the cubes...
    The botton rail is aluminum for stiffness and support, the top one on the frame and the middle one on the module are delrin for low friction

    https://picasaweb.google.com/103828779781480193226/DougSShop?noredirect=1#6057749851482539826
     
    #12 CubeSpawn, Oct 3, 2014
  13. CubeSpawn

    CubeSpawn New
    Builder

    Joined:
    May 18, 2014
    Messages:
    22
    Likes Received:
    10
    #13 CubeSpawn, Oct 6, 2014
  14. cor5151

    cor5151 New
    Builder

    Joined:
    Oct 11, 2014
    Messages:
    4
    Likes Received:
    0
    I like this idea! but i don't have a space or monies to build one, but this could work great on a much smaller scale.
    I'm thinking a cd/dvd drive powered pcb factory or candy maker.. only way i could adopt this as a nother thing to work on.
     
    #14 cor5151, Oct 29, 2014
  15. CubeSpawn

    CubeSpawn New
    Builder

    Joined:
    May 18, 2014
    Messages:
    22
    Likes Received:
    10
    Hey cor5151, the design intentionally accommodates a 300mm cube for tabletop applications like the ones you mention, I'd love to see a 4 head, 300mm Pick &Place design, but we are tied up getting the 600's together right now... the next big push will be on trying to get ROS integrated into the 3 machines proposed in the current demo array:

    https://picasaweb.google.com/103828779781480193226/DougSShop#6067573117148309650
     
    #15 CubeSpawn, Oct 29, 2014
  16. cor5151

    cor5151 New
    Builder

    Joined:
    Oct 11, 2014
    Messages:
    4
    Likes Received:
    0
    That looks like a really fun project! i'm currently building my first 3 axis cnc with stuff i bought here, so i'm totally new to that, although a little better with robotics, and been building/working on 3d printers for the better part of this year.
    I'm currently printing parts for my cnc and could probably use some pointers on it, just need to finish it. I want to cut aluminum eventually and i'm curious if 290oz nema 23's and a 10krpm makita angle grinder converted to a spindle would be decent for that. also going to use gt2 belt for starters because i've got it, but want to use screws once i can. overall size of the build is about 3ft y axis by 4ft x axis, prob only 6-7in on the z axis. using openbeam extrusions with 2x open rails on each side in abs printed box with 8 wheels on each side of the y rails, and 1500mm 20x80 vslot for x, will cut it down and use some of that for z axis too.
     
    #16 cor5151, Oct 30, 2014

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice