One of my kids is not easily impressed, he is turning 6 and puzzles are very easy for him. This encouraged me to make him a puzzle, hope it takes him a while i know i cant resolve it by myself.
- Machine Type:
- Laser / Plasma
- Software:
- Illustrator / LaserWeb4
- Machine Time:
- 10min
- Bit or Laser Size:
- Laser defult size
- Feeds & Speeds:
- 7mm/s
- Materials:
- 3mm Ply and Acrylic
Browsing through the internet gave me an idea so i drew my own.
The steps are very simple, just make sure to inspect the included SVG file an its layers
Cut Ouside: Use this to cut the bottom plate from ply and the top frame from acrylic, You could need to offset the inner part of the triangle by just a tiny bit
Edge: This should be done at a fast speed and low power, the idea i just to mark the small triangles
Cut: This should cut the perimeter of each shape that make the puzzle
I painted the shape with Poska paint markers just to give it a little color. This indeed makes it easier to solve if you see it assembled
Good luck solving this one!!!!
Share this Project
rokasni, Mark Carew and GrayUK like this.
User Comments
Sort Comments By