Beginner Tool /collet Drawer

Machine Type:

OpenBuilds LEAD Machine

Software:

Vectric

Electronics:

OpenBuilds BlackBox

Machine Time:

Lead 1515

Bit or Laser Size:

1/4” 2 flute, 1/8” 2 flute, 90 degree V-Bit

Feeds & Speeds:

80 In/min, .3 Inch DOC for 1/4”; 70 In/min, .15 Inch DoC for 1/8”

Materials:

3/4” MDF

Simple pull out drawer to be mounted under the machine to hold the tools needed. Spots for all collets, and router bits. Collets ranging from .5mm to 13mm in both standard and metric. Bit can be stored in their protective packages, but still readable.

total time on machine was under an hour with tool changes. Need to fill in the V-Carve letters to be visible.