Asian Influence

Software:

Vectric, Open Builds

Machine Time:

5 hrs

Bit or Laser Size:

1/8th and 1/4 Bullnose

Feeds & Speeds:

60/30

Materials:

Fir. An old 2 x 12 I found

I had this old weathered board so I thought I would do this. Stay tuned. After finishing this I came up with an idea similar to an inlay technique so we will see if it works.
Enjoy.

I need a bigger bed size. I am just to limited. I hope I can buy parts and create a bigger bed size without having to buy a whole new machine.